Custom Weld 17 - 26 ft. Outboards 2011 vs Custom Weld 19 ft. Viper Series 2013 - Boat Spec Comparison

Q: Which is the larger boat — the Custom Weld 17 - 26 ft. Outboards 2011 or the Custom Weld 19 ft. Viper Series 2013?

The Custom Weld 19 ft. Viper Series 2013 is the longer of the two at 18,7 feet overall. The Custom Weld 17 - 26 ft. Outboards 2011 comes in at 17,0 feet, making it roughly 1,7 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: What is the maximum horsepower rating for these boats?

The Custom Weld 17 - 26 ft. Outboards 2011 has a documented max rating of 19 hp. Engine specifications for the Custom Weld 19 ft. Viper Series 2013 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

Q: How many people can each boat hold?

The Custom Weld 17 - 26 ft. Outboards 2011 is Coast Guard rated for 7 passengers, while the Custom Weld 19 ft. Viper Series 2013 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Custom Weld 17 - 26 ft. Outboards 2011 measures 102" wide, compared to 96" for the Custom Weld 19 ft. Viper Series 2013. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Which boat has the larger fuel tank — the Custom Weld 17 - 26 ft. Outboards 2011 or the Custom Weld 19 ft. Viper Series 2013?

The Custom Weld 19 ft. Viper Series 2013 has the bigger tank at 38 gallons, versus 9 gallons on the Custom Weld 17 - 26 ft. Outboards 2011. That 29-gallon difference translates to roughly 87–145 nautical miles of additional range at cruising speed, depending on motor, load, and conditions.

Q: Are the Custom Weld 17 - 26 ft. Outboards 2011 and Custom Weld 19 ft. Viper Series 2013 from the same manufacturer?

Yes — both the Custom Weld 17 - 26 ft. Outboards 2011 and the Custom Weld 19 ft. Viper Series 2013 are built by Custom Weld. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Custom Weld 17 - 26 ft. Outboards 2011 vs Custom Weld 19 ft. Viper Series 2013

Custom Weld

Custom Weld 17 - 26 ft. Outboards 2011

2011

View full specs →

Custom Weld

Custom Weld 19 ft. Viper Series 2013

2013

View full specs →

Detailed Evaluation & Buyer Recommendation

Custom Weld 17 - 26 ft. Outboards 2011 vs Custom Weld 19 ft. Viper Series 2013 — Same Brand, Different Boat

Matching a modified vee Custom Weld 17 - 26 ft. Outboards 2011 against a deep vee Custom Weld 19 ft. Viper Series 2013 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

The Custom Weld 17 - 26 ft. Outboards 2011 carries a rated maximum of 19 hp. Engine data for the Custom Weld 19 ft. Viper Series 2013 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.Fuel capacity breaks the other way: the Custom Weld 19 ft. Viper Series 2013 carries 38 gallons versus 9 gallons in the Custom Weld 17 - 26 ft. Outboards 2011. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Custom Weld 17 - 26 ft. Outboards 2011 is rated for 7 passengers, while the Custom Weld 19 ft. Viper Series 2013 caps at 5. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Custom Weld 17 - 26 ft. Outboards 2011 could be the deciding factor.

Bottom line: Choose the Custom Weld 17 - 26 ft. Outboards 2011 if your priority is putting more people on the water — it handles 7 passengers and at 17,0 ft it has the deck room to back that rating up comfortably. The Custom Weld 19 ft. Viper Series 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 5 that costs less to run day-to-day.

General Boat Info

MakeCustom Weld

Model17 - 26 ft. Outboards

Model19 ft. Viper Series

Model Year2011

Model Year2013

Measurements / Dimensions

Beam96 - 102 in

Beam96 in

Beam - Meters2.59

Beam - Meters2.44

Beam - Inches102

Beam - Inches96

Length - Feet17

Length - Feet18.67

Length overall - Detail17 - 26 ft

Length overall - Detail18 ft. 8 in. hull center length

Length overall - Meters7.92

Length overall - Meters5.69

Length overall - Inches312

Length overall - Inches224

Deadrisenot available

Deadrise11°

Weight - Detailnot available

Weight - Detail2,400 lbs

Weight - kgnot available

Weight - kg1088.62

Weight - lbs.not available

Weight - lbs.24

Width [transom] - Detailnot available

Width [transom] - Detail72 in. bottom width

Height - Detailnot available

Height - Detail34 in. side 26 in. inside freeboard

Height - Metersnot available

Height - Meters0.86

Height - Inchesnot available

Height - Inches34

Body / Hull

Hull materialAluminum

Hull typeModified Vee

Hull typeDeep Vee

Hull thicknessnot available

Hull thickness0.190 bottom; 0.125 side

Engine and Drivetrain

Fuel tank capacity - Detail38 - 90 gal

Fuel tank capacity - Detail38 gal

Fuel tank capacity - Liters340.69

Fuel tank capacity - Liters143.85

Fuel tank capacity - Gal9

Fuel tank capacity - Gal38

Fuel typeGas

Drive typeOutboard

Drive typeJet Drive

Horsepower19 ft.: 175 hp 20 ft.: 200 hp 21 - 22 ft.: 250 hp 23 - 24 ft.: 300 hp or as specified 25 - 26 ft.: 400 hp or as specified

Horsepowernot available

Engine modelnot available

Engine modelMEFI 5 4.3 V-6 Vortec

Jet pumpnot available

Jet pumpATJ SD309

Custom Weld 17 - 26 ft. Outboards 2011 vs Custom Weld 19 ft. Viper Series 2013 — Common Questions

Which is the larger boat — the Custom Weld 17 - 26 ft. Outboards 2011 or the Custom Weld 19 ft. Viper Series 2013?

The Custom Weld 19 ft. Viper Series 2013 is the longer of the two at 18,7 feet overall. The Custom Weld 17 - 26 ft. Outboards 2011 comes in at 17,0 feet, making it roughly 1,7 ft shorter — a meaningful difference in deck room and overall on-water presence.

What is the maximum horsepower rating for these boats?

The Custom Weld 17 - 26 ft. Outboards 2011 has a documented max rating of 19 hp. Engine specifications for the Custom Weld 19 ft. Viper Series 2013 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

How many people can each boat hold?

The Custom Weld 17 - 26 ft. Outboards 2011 is Coast Guard rated for 7 passengers, while the Custom Weld 19 ft. Viper Series 2013 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Custom Weld 17 - 26 ft. Outboards 2011 measures 102" wide, compared to 96" for the Custom Weld 19 ft. Viper Series 2013. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Which boat has the larger fuel tank — the Custom Weld 17 - 26 ft. Outboards 2011 or the Custom Weld 19 ft. Viper Series 2013?

The Custom Weld 19 ft. Viper Series 2013 has the bigger tank at 38 gallons, versus 9 gallons on the Custom Weld 17 - 26 ft. Outboards 2011. That 29-gallon difference translates to roughly 87–145 nautical miles of additional range at cruising speed, depending on motor, load, and conditions.

Are the Custom Weld 17 - 26 ft. Outboards 2011 and Custom Weld 19 ft. Viper Series 2013 from the same manufacturer?

Yes — both the Custom Weld 17 - 26 ft. Outboards 2011 and the Custom Weld 19 ft. Viper Series 2013 are built by Custom Weld. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Custom Weld 17 - 26 ft. Outboards 2011 full specs ← Custom Weld 19 ft. Viper Series 2013 full specs