Crestliner CR 1852MT 2012 boat specs
Crestliner
Crestliner CR 1852MT 2012
2012
View full specs →
VS
Crestliner Raptor 1750 SC  2013 boat specs
Crestliner
Crestliner Raptor 1750 SC 2013
2013
View full specs →

Crestliner CR 1852MT 2012 vs Crestliner Raptor 1750 SC 2013 — Same Brand, Different Boat

Matching a flat Crestliner CR 1852MT 2012 against a deep vee Crestliner Raptor 1750 SC 2013 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — Crestliner CR 1852MT 2012 at 18,0 ft versus Crestliner Raptor 1750 SC 2013 at 17,7 ft. Weight tells a clearer story for trailering families: the Crestliner CR 1852MT 2012 tips the scales at 475 lbs — 461 lbs more than the Crestliner Raptor 1750 SC 2013 at 14 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 150 hp, the Crestliner Raptor 1750 SC 2013 has a 105-hp advantage over the Crestliner CR 1852MT 2012's 45-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 6 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Crestliner Raptor 1750 SC 2013 comes in at 0 lbs per hp versus 11 lbs per hp for the Crestliner CR 1852MT 2012. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the Crestliner Raptor 1750 SC 2013 and its 150-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Crestliner CR 1852MT 2012 with its 45-hp rating is the more economical daily driver.
General Boat Info
MakeCrestliner
MakeCrestliner
ModelCR 1852MT
ModelRaptor 1750 SC
Model Year2012
Model Year2013
Measurements / Dimensions
Beam75 in. (191 cm)
Beam96 in. (245 cm)
Beam - Meters1.91
Beam - Meters2.44
Beam - Inches75
Beam - Inches96
Depth - DetailSide: 21 in. (53 cm)
Depth - DetailMaximum: 41 in. (104 cm) Cockpit: 24 in. (61 cm)
Depth - Centimeters53.34
Depth - Centimeters104.14
Depth - Inches21
Depth - Inches41
Weight - Detail475 lbs. (215 kg)
Weight - Detail1,400 lbs. (635 kg)
Weight - kg215.46
Weight - kg635.03
Weight - lbs.475
Weight - lbs.14
Height [transom]20 in. (51 cm)
Height [transom]25 in. (64 cm)
Length - Feet18
Length - Feet17.67
Length overall - Detail18 ft. (5.5 m)
Length overall - Detail17 ft. 8 in. (5.4 m)
Length overall - Meters5.49
Length overall - Meters5.38
Length overall - Inches216
Length overall - Inches212
Deadrisenot available
Deadrise17°
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.072 in
Hull thicknessBottom: 0.10 in. Sides: 0.09 in. Transom: 0.125 in
Hull typeFlat
Hull typeDeep Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max45 hp
Engine max150 hp
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail33 gal. (125 l)
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters124.92
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal33
Operational Info
Maximum capacity1,375 lbs. (624 kg)
Maximum capacity1,425 lbs. (646 kg)
Maximum people6
Maximum people6

Crestliner CR 1852MT 2012 vs Crestliner Raptor 1750 SC 2013 — Common Questions

Which is the larger boat — the Crestliner CR 1852MT 2012 or the Crestliner Raptor 1750 SC 2013?
The Crestliner CR 1852MT 2012 is the longer of the two at 18,0 feet overall. The Crestliner Raptor 1750 SC 2013 comes in at 17,7 feet, making it roughly 0,3 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Crestliner CR 1852MT 2012 or the Crestliner Raptor 1750 SC 2013?
For trailering, the Crestliner Raptor 1750 SC 2013 has the edge at 14 lbs dry weight versus 475 lbs for the Crestliner CR 1852MT 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Crestliner Raptor 1750 SC 2013 is rated to a maximum of 150 hp, giving it the larger power ceiling. The Crestliner CR 1852MT 2012 tops out at 45 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Crestliner CR 1852MT 2012 is Coast Guard rated for 6 passengers, while the Crestliner Raptor 1750 SC 2013 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Crestliner Raptor 1750 SC 2013 has a better power-to-weight ratio at 0 lbs per hp compared to 11 lbs per hp for the Crestliner CR 1852MT 2012. A lower number means quicker acceleration and faster time to plane — the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Crestliner Raptor 1750 SC 2013 measures 96" wide, compared to 75" for the Crestliner CR 1852MT 2012. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Crestliner CR 1852MT 2012 and Crestliner Raptor 1750 SC 2013 from the same manufacturer?
Yes — both the Crestliner CR 1852MT 2012 and the Crestliner Raptor 1750 SC 2013 are built by Crestliner. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.