Crestliner CR 1852 MT 2005 boat specs
Crestliner
Crestliner CR 1852 MT 2005
2005
View full specs →
VS
Crestliner Raptor 1750 WT 2013 boat specs
Crestliner
Crestliner Raptor 1750 WT 2013
2013
View full specs →

Crestliner CR 1852 MT 2005 vs Crestliner Raptor 1750 WT 2013 — Same Brand, Different Boat

The Crestliner CR 1852 MT 2005 vs Crestliner Raptor 1750 WT 2013 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — Crestliner CR 1852 MT 2005 at 18,0 ft versus Crestliner Raptor 1750 WT 2013 at 17,7 ft. At 4 lbs and 14 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The power gap is worth calling out. Rated to 150 hp, the Crestliner Raptor 1750 WT 2013 has a 105-hp advantage over the Crestliner CR 1852 MT 2005's 45-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 6 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Crestliner Raptor 1750 WT 2013 comes in at 0 lbs per hp versus 0 lbs per hp for the Crestliner CR 1852 MT 2005. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the Crestliner Raptor 1750 WT 2013 and its 150-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Crestliner CR 1852 MT 2005 with its 45-hp rating is the more economical daily driver.
General Boat Info
MakeCrestliner
MakeCrestliner
ModelCR 1852 MT
ModelRaptor 1750 WT
Model Year2005
Model Year2013
Measurements / Dimensions
Beam75 in. (191 cm)
Beam96 in. (245 cm)
Beam - Meters1.91
Beam - Meters2.44
Beam - Inches75
Beam - Inches96
Depth - Detail21 in. (53 cm)
Depth - DetailMaximum: 41 in. (104 cm) Cockpit: 24 in. (61 cm)
Depth - Centimeters53.34
Depth - Centimeters104.14
Depth - Inches21
Depth - Inches41
Weight - Detail400 lbs. (182 kg)
Weight - Detail1,400 lbs. (635 kg)
Weight - kg181.44
Weight - kg635.03
Weight - lbs.4
Weight - lbs.14
Width [transom] - Detail52 in. (132 cm)
Width [transom] - Detailnot available
Height [transom]20 in. (51 cm)
Height [transom]25 in. (64 cm)
Length - Meters5.5
Length - Metersnot available
Length - Feet18
Length - Feet17.67
Length overall - Detail18 ft. 0 in. (5.5 m)
Length overall - Detail17 ft. 8 in. (5.4 m)
Length overall - Meters5.49
Length overall - Meters5.38
Length overall - Inches216
Length overall - Inches212
Deadrisenot available
Deadrise17°
Body / Hull
Hull thickness.072 in
Hull thicknessBottom: 0.10 in. Sides: 0.09 in. Transom: 0.125 in
Hull materialnot available
Hull materialAluminum
Hull typenot available
Hull typeDeep Vee
Engine and Drivetrain
Engine max45 hp
Engine max150 hp
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail33 gal. (125 l)
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters124.92
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal33
Fuel typenot available
Fuel typeGas
Drive typenot available
Drive typeOutboard
Operational Info
Maximum capacity1,375 lbs. (624 kg)
Maximum capacity1,425 lbs. (646 kg)
Maximum people6
Maximum people6

Crestliner CR 1852 MT 2005 vs Crestliner Raptor 1750 WT 2013 — Common Questions

Which is the larger boat — the Crestliner CR 1852 MT 2005 or the Crestliner Raptor 1750 WT 2013?
The Crestliner CR 1852 MT 2005 is the longer of the two at 18,0 feet overall. The Crestliner Raptor 1750 WT 2013 comes in at 17,7 feet, making it roughly 0,3 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Crestliner CR 1852 MT 2005 or the Crestliner Raptor 1750 WT 2013?
For trailering, the Crestliner CR 1852 MT 2005 has the edge at 4 lbs dry weight versus 14 lbs for the Crestliner Raptor 1750 WT 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Crestliner Raptor 1750 WT 2013 is rated to a maximum of 150 hp, giving it the larger power ceiling. The Crestliner CR 1852 MT 2005 tops out at 45 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Crestliner CR 1852 MT 2005 is Coast Guard rated for 6 passengers, while the Crestliner Raptor 1750 WT 2013 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Crestliner Raptor 1750 WT 2013 has a better power-to-weight ratio at 0 lbs per hp compared to 0 lbs per hp for the Crestliner CR 1852 MT 2005. A lower number means quicker acceleration and faster time to plane — the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Crestliner Raptor 1750 WT 2013 measures 96" wide, compared to 75" for the Crestliner CR 1852 MT 2005. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Crestliner CR 1852 MT 2005 and Crestliner Raptor 1750 WT 2013 from the same manufacturer?
Yes — both the Crestliner CR 1852 MT 2005 and the Crestliner Raptor 1750 WT 2013 are built by Crestliner. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.