Cranchi M38 HT 2013 boat specs
Cranchi
Cranchi M38 HT 2013
2013
View full specs →
VS
Cranchi Pelican 36 2010 boat specs
Cranchi
Cranchi Pelican 36 2010
2010
View full specs →

Cranchi M38 HT 2013 vs Cranchi Pelican 36 2010: A Close Look at Two Deep-V Boats

Both the Cranchi M38 HT 2013 and the Cranchi Pelican 36 2010 are deep-V designs, both built in fibreglass, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department - Cranchi M38 HT 2013 at 38,4 ft versus Cranchi Pelican 36 2010 at 36,4 ft. Weight tells a clearer story for trailering families: the Cranchi M38 HT 2013 tips the scales at 16 350 lbs - 800 lbs more than the Cranchi Pelican 36 2010 at 15 550 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Cranchi Pelican 36 2010 tops out at 2 hp. Engine specs for the Cranchi M38 HT 2013 aren't listed - confirm with a dealer before selecting an outboard.Both carry nearly identical fuel loads - 158 gal and 158 gal - so range won't be a tiebreaker here.

Both boats are rated for 12 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Cranchi M38 HT 2013 at 38,4 ft is the right call if deck space, comfort, and entertaining are top of your list. The Cranchi Pelican 36 2010 at 36,4 ft wins on trailering ease, likely lower purchase price, and simpler docking - a solid choice for a buyer who wants more boat for less money.
General Boat Info
MakeCranchi
MakeCranchi
ModelM38 HT
ModelPelican 36
Model Year2013
Model Year2010
Measurements / Dimensions
BeamMax: 12 ft. 8 in. (3.88 m) without rubbing band Hull: 12 ft. 7 in. (3.85 m) without rubbing band
BeamMaximum: 12 ft. 8 in. (with rubbing band) Hull: 12 ft. 6 in.(without rubbing band)
Beam - Meters3.86
Beam - Meters3.86
Beam - Inches152
Beam - Inches152
Draft [max] - Detail3 ft. 3 in. (1 m) including props
Draft [max] - Detail3 ft. 3 in. (including props)
Draft [max] - Meters0.99
Draft [max] - Meters0.99
Draft [max] - Inches39
Draft [max] - Inches39
Weight - DetailDry: 16,350 lbs. (7,400 kg)
Weight - Detail15,550 lbs.
Weight - kg7416.23
Weight - kg7053.36
Weight - lbs.16350
Weight - lbs.15550
Length [at waterline]26 ft. 9 in.
Length [at waterline]26 ft. 8 in.
Length - Feet38.42
Length - Feet36.4
Length overall - Detail38 ft. 5 in.
Length overall - Detail36 ft. 5 in.
Length overall - Meters11.71
Length overall - Meters11.1
Length overall - Inches461
Length overall - Inches437
Height - Detailnot available
Height - DetailAbove Waterline: 12 ft. (including radar)
Height - Metersnot available
Height - Meters3.66
Height - Inchesnot available
Height - Inches144
Body / Hull
Hull materialFiberglass
Hull materialFiberglass
Hull typeDeep Vee
Hull typeDeep Vee
Engine and Drivetrain
Fuel tank capacity - Detail158 gal. approx. (600 l)
Fuel tank capacity - Detail158 gal.
Fuel tank capacity - Liters598.09
Fuel tank capacity - Liters598.09
Fuel tank capacity - Gal158
Fuel tank capacity - Gal158
Fuel typeDiesel
Fuel typeDiesel
Engine makenot available
Engine makeVolvo
Engine modelnot available
Engine modelPenta
Drive typenot available
Drive typeInboard - Twin
Engine maxnot available
Engine max2 x 300 hp
Operational Info
Water capacity50 gal. (189.3 l)
Water capacity50 gal.
Maximum people12 / 2,650 lbs. (1,200 kg)
Maximum people12 / 2.508 lbs.
Performance
Maximum speednot available
Maximum speed35
Maximum speed measurenot available
Maximum speed measureKnots

Cranchi M38 HT 2013 vs Cranchi Pelican 36 2010 - Common Questions

Which is the larger boat - the Cranchi M38 HT 2013 or the Cranchi Pelican 36 2010?
The Cranchi M38 HT 2013 is the longer of the two at 38,4 feet overall. The Cranchi Pelican 36 2010 comes in at 36,4 feet, making it roughly 2,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Cranchi M38 HT 2013 or the Cranchi Pelican 36 2010?
For trailering, the Cranchi Pelican 36 2010 has the edge at 15 550 lbs dry weight versus 16 350 lbs for the Cranchi M38 HT 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Cranchi Pelican 36 2010 has a documented max rating of 2 hp. Engine specifications for the Cranchi M38 HT 2013 were not available in our database - check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Cranchi M38 HT 2013 is Coast Guard rated for 12 passengers, while the Cranchi Pelican 36 2010 is certified for 12. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Cranchi M38 HT 2013 and Cranchi Pelican 36 2010 share an Max: 12 ft. 8 in. (3.88 m) without rubbing band Hull: 12 ft. 7 in. (3.85 m) without rubbing band beam - meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
How do the fuel tanks compare on the Cranchi M38 HT 2013 and Cranchi Pelican 36 2010?
Both boats carry similar fuel loads - 158 gallons and 158 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.
Are the Cranchi M38 HT 2013 and Cranchi Pelican 36 2010 from the same manufacturer?
Yes - both the Cranchi M38 HT 2013 and the Cranchi Pelican 36 2010 are built by Cranchi. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.