Cranchi Atlantique 43 2010 boat specs
Cranchi
Cranchi Atlantique 43 2010
2010
View full specs →
VS
Cranchi M44 HT 2013 boat specs
Cranchi
Cranchi M44 HT 2013
2013
View full specs →

Cranchi Atlantique 43 2010 vs Cranchi M44 HT 2013 — A Close Look at Two Deep Vees

When two boats share the same hull type — in this case both the Cranchi Atlantique 43 2010 and the Cranchi M44 HT 2013 are deep vee designs with fiberglass construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Cranchi Atlantique 43 2010 at 45,3 ft versus Cranchi M44 HT 2013 at 44,8 ft. At 26 lbs and 21 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The Cranchi Atlantique 43 2010 carries a rated maximum of 2 hp. Engine data for the Cranchi M44 HT 2013 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.Fuel capacity breaks the other way: the Cranchi Atlantique 43 2010 carries 291 gallons versus 264 gallons in the Cranchi M44 HT 2013. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

Both boats are rated for 12 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Cranchi Atlantique 43 2010 and Cranchi M44 HT 2013 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeCranchi
MakeCranchi
ModelAtlantique 43
ModelM44 HT
Model Year201
Model Year2013
Measurements / Dimensions
BeamMaximum: 13 ft. 6 in. Hull: 13 ft. 4 in
BeamMax: 13 ft. 3 in. (4.06 m) including rub band Hull: 13 ft. 1 in. (4 m) without including rub band
Beam - Meters4.11
Beam - Meters4.04
Beam - Inches162
Beam - Inches159
Draft [max] - Detail3 ft. 4 in. (including props)
Draft [max] - Detail3 ft. 2 in. (0.96 m) including props
Draft [max] - Meters1.02
Draft [max] - Meters0.97
Draft [max] - Inches4
Draft [max] - Inches38
Weight - Detail26,000 lbs
Weight - Detail21,000 lbs. (9,500 kg)
Weight - kg11793.39
Weight - kg9525.43
Weight - lbs.26
Weight - lbs.21
Height - DetailAbove Waterline: 17 ft. (with lights)
Height - Detailnot available
Height - Meters5.18
Height - Metersnot available
Height - Inches204
Height - Inchesnot available
Length [at waterline]31 ft. 5 in
Length [at waterline]32 ft. 5 in. (9.9 m)
Length - Feet45.3
Length - Feet44.83
Length overall - Detail45 ft. 3 in
Length overall - Detail44 ft. 10 in. (13.7 m)
Length overall - Meters13.79
Length overall - Meters13.67
Length overall - Inches543
Length overall - Inches538
Body / Hull
Hull materialFiberglass
Hull materialFiberglass
Hull typeDeep Vee
Hull typeDeep Vee
Engine and Drivetrain
Engine makeVolvo
Engine makenot available
Engine modelPenta
Engine modelnot available
Fuel tank capacity - Detail291 gal
Fuel tank capacity - Detail264 gal. (1,000 l)
Fuel tank capacity - Liters1101.55
Fuel tank capacity - Liters999.35
Fuel tank capacity - Gal291
Fuel tank capacity - Gal264
Fuel typeDiesel
Fuel typeDiesel
Drive typeInboard - Twin
Drive typenot available
Engine max2 x 435 hp
Engine maxnot available
Performance
Maximum speed35
Maximum speednot available
Maximum speed measureKnots
Maximum speed measurenot available
Operational Info
Water capacity79 gal
Water capacity79 gal. (300 l)
Maximum people12 / 2,508 lbs
Maximum people12 / 2,650 lbs. (1,200 kg)

Cranchi Atlantique 43 2010 vs Cranchi M44 HT 2013 — Common Questions

Which is the larger boat — the Cranchi Atlantique 43 2010 or the Cranchi M44 HT 2013?
The Cranchi Atlantique 43 2010 is the longer of the two at 45,3 feet overall. The Cranchi M44 HT 2013 comes in at 44,8 feet, making it roughly 0,5 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Cranchi Atlantique 43 2010 or the Cranchi M44 HT 2013?
For trailering, the Cranchi M44 HT 2013 has the edge at 21 lbs dry weight versus 26 lbs for the Cranchi Atlantique 43 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Cranchi Atlantique 43 2010 has a documented max rating of 2 hp. Engine specifications for the Cranchi M44 HT 2013 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Cranchi Atlantique 43 2010 is Coast Guard rated for 12 passengers, while the Cranchi M44 HT 2013 is certified for 12. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Cranchi Atlantique 43 2010 measures 162" wide, compared to 159" for the Cranchi M44 HT 2013. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Which boat has the larger fuel tank — the Cranchi Atlantique 43 2010 or the Cranchi M44 HT 2013?
The Cranchi Atlantique 43 2010 has the bigger tank at 291 gallons, versus 264 gallons on the Cranchi M44 HT 2013. That 27-gallon difference translates to roughly 81–135 nautical miles of additional range at cruising speed, depending on motor, load, and conditions.
Are the Cranchi Atlantique 43 2010 and Cranchi M44 HT 2013 from the same manufacturer?
Yes — both the Cranchi Atlantique 43 2010 and the Cranchi M44 HT 2013 are built by Cranchi. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.