When two boats share the same hull type — in this case both the Cobalt Boats 276 2012 and the Cobalt Boats 302 2010 are deep vee designs with fiberglass construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Cobalt Boats 276 2012 at 27,5 ft versus Cobalt Boats 302 2010 at 29,8 ft. Weight tells a clearer story for trailering families: the Cobalt Boats 302 2010 tips the scales at 988 lbs — 933 lbs less than the Cobalt Boats 276 2012 at 55 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 430 hp, the Cobalt Boats 276 2012 has a 130-hp advantage over the Cobalt Boats 302 2010's 300-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Cobalt Boats 276 2012 carries 95 gallons versus 15 gallons in the Cobalt Boats 302 2010. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Cobalt Boats 302 2010 is rated for 9 passengers, while the Cobalt Boats 276 2012 caps at 8. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Cobalt Boats 302 2010 could be the deciding factor.