When two boats share the same hull type — in this case both the Cobalt Boats 230 2010 and the Cobalt Boats 262 2011 are deep vee designs with fiberglass construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

Size is the most obvious dividing line here. The Cobalt Boats 262 2011 measures 25,6 feet overall (2011), giving it roughly 3,8 additional feet of deck space compared to the Cobalt Boats 230 2010 at 21,8 feet (2010). Weight tells a clearer story for trailering families: the Cobalt Boats 262 2011 tips the scales at 5 425 lbs — 5 010 lbs less than the Cobalt Boats 230 2010 at 415 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 300 hp, the Cobalt Boats 230 2010 has a 294-hp advantage over the Cobalt Boats 262 2011's 6-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Cobalt Boats 262 2011 carries 73 gallons versus 5 gallons in the Cobalt Boats 230 2010. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Cobalt Boats 230 2010 is rated for 12 passengers, while the Cobalt Boats 262 2011 caps at 2. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Cobalt Boats 230 2010 could be the deciding factor.