The Catalina Yachts 30 Tall Rig Cutter Rigged 1979 vs Catalina Yachts Catalina 36 MkII - Fin Keel Fin Keel 1994 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.
Size is the most obvious dividing line here. The Catalina Yachts Catalina 36 MkII - Fin Keel Fin Keel 1994 measures 36,4 feet overall (1994), giving it roughly 6,4 additional feet of deck space compared to the Catalina Yachts 30 Tall Rig Cutter Rigged 1979 at 30,0 feet (1979). Weight tells a clearer story for trailering families: the Catalina Yachts Catalina 36 MkII - Fin Keel Fin Keel 1994 tips the scales at 13 499 lbs — 3 299 lbs less than the Catalina Yachts 30 Tall Rig Cutter Rigged 1979 at 10 200 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The Catalina Yachts 30 Tall Rig Cutter Rigged 1979 carries a rated maximum of 11 hp. Engine data for the Catalina Yachts Catalina 36 MkII - Fin Keel Fin Keel 1994 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.Fuel capacity breaks the other way: the Catalina Yachts Catalina 36 MkII - Fin Keel Fin Keel 1994 carries 33 gallons versus 12 gallons in the Catalina Yachts 30 Tall Rig Cutter Rigged 1979. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
For family outings this is probably the sharpest distinction between the two. The Catalina Yachts Catalina 36 MkII - Fin Keel Fin Keel 1994 is rated for 11 passengers, while the Catalina Yachts 30 Tall Rig Cutter Rigged 1979 caps at 9. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Catalina Yachts Catalina 36 MkII - Fin Keel Fin Keel 1994 could be the deciding factor.
Displacement is where these two sailboats genuinely part ways. The Catalina Yachts Catalina 36 MkII - Fin Keel Fin Keel 1994 displaces 13 499 lbs — a 3 299-lb difference over the Catalina Yachts 30 Tall Rig Cutter Rigged 1979 at 10 200 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.
Both boats draw a similar depth — 5,3 ft and 5,1 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.
The Catalina Yachts 30 Tall Rig Cutter Rigged 1979 has a documented auxiliary engine of 11 hp.
Bottom line: The Catalina Yachts Catalina 36 MkII - Fin Keel Fin Keel 1994 is the offshore and bluewater choice — at 13 499 lbs displacement and 36 ft it has the load capacity, range, and seakeeping for extended passages. The Catalina Yachts 30 Tall Rig Cutter Rigged 1979 at 10 200 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.