The Beneteau Oceanis Clipper 473 2008 vs Beneteau R/C 30 1977 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis Clipper 473 2008 measures 46,9 feet overall (2008), giving it roughly 17,4 additional feet of deck space compared to the Beneteau R/C 30 1977 at 29,5 feet (1977). Weight tells a clearer story for trailering families: the Beneteau Oceanis Clipper 473 2008 tips the scales at 24 277 lbs — 15 282 lbs more than the Beneteau R/C 30 1977 at 8 995 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Beneteau R/C 30 1977 tops out at 15 hp. Engine specs for the Beneteau Oceanis Clipper 473 2008 aren't listed — confirm with a dealer before selecting an outboard.Fuel capacity breaks the other way: the Beneteau Oceanis Clipper 473 2008 carries 57 gallons versus 8 gallons in the Beneteau R/C 30 1977. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis Clipper 473 2008 is rated for 14 passengers, while the Beneteau R/C 30 1977 caps at 8. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis Clipper 473 2008 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis Clipper 473 2008 displaces 24 277 lbs — a 15 282-lb difference over the Beneteau R/C 30 1977 at 8 995 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Both boats draw a similar depth — 5,6 ft and 5,8 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Beneteau Oceanis Clipper 473 2008 is rigged as a Masthead-sloop while the Beneteau R/C 30 1977 carries Sloop rigging — a meaningful difference in sail handling complexity, upwind performance, and the size of crew you'll need to work the boat comfortably. The Beneteau R/C 30 1977 has a documented auxiliary engine of 15 hp.

For extended cruising, water capacity matters: the Beneteau Oceanis Clipper 473 2008 carries 222 gallons versus 24 gallons on the Beneteau R/C 30 1977 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.