The Beneteau Oceanis Clipper 411 2008 vs Beneteau Oceanis Clipper 423 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.
On paper these two are close siblings in the size department — Beneteau Oceanis Clipper 411 2008 at 41,0 ft versus Beneteau Oceanis Clipper 423 2008 at 43,1 ft. Weight tells a clearer story for trailering families: the Beneteau Oceanis Clipper 423 2008 tips the scales at 19 500 lbs — 2 304 lbs less than the Beneteau Oceanis Clipper 411 2008 at 17 196 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The Beneteau Oceanis Clipper 423 2008 tops out at 80 hp. Engine specs for the Beneteau Oceanis Clipper 411 2008 aren't listed — confirm with a dealer before selecting an outboard.Fuel capacity breaks the other way: the Beneteau Oceanis Clipper 423 2008 carries 53 gallons versus 45 gallons in the Beneteau Oceanis Clipper 411 2008. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis Clipper 423 2008 is rated for 13 passengers, while the Beneteau Oceanis Clipper 411 2008 caps at 12. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis Clipper 423 2008 could be the deciding factor.
Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis Clipper 423 2008 displaces 19 500 lbs — a 2 304-lb difference over the Beneteau Oceanis Clipper 411 2008 at 17 196 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.
Both boats draw a similar depth — 4,8 ft and 5,6 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.
The Beneteau Oceanis Clipper 423 2008 has a documented auxiliary engine of 80 hp.
Bottom line: The Beneteau Oceanis Clipper 423 2008 is the offshore and bluewater choice — at 19 500 lbs displacement and 43 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau Oceanis Clipper 411 2008 at 17 196 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.