The Beneteau Oceanis 50 2014 vs Beneteau Oceanis Clipper 411 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.
Size is the most obvious dividing line here. The Beneteau Oceanis 50 2014 measures 49,5 feet overall (2014), giving it roughly 8,5 additional feet of deck space compared to the Beneteau Oceanis Clipper 411 2008 at 41,0 feet (2008). Weight tells a clearer story for trailering families: the Beneteau Oceanis 50 2014 tips the scales at 27 454 lbs - 10 258 lbs more than the Beneteau Oceanis Clipper 411 2008 at 17 196 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The Beneteau Oceanis 50 2014 carries a rated maximum of 76 hp. Engine data for the Beneteau Oceanis Clipper 411 2008 wasn't available in our records - check the manufacturer's spec sheet before sizing a motor.Fuel capacity breaks the other way: the Beneteau Oceanis 50 2014 carries 62 gallons versus 45 gallons in the Beneteau Oceanis Clipper 411 2008. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis 50 2014 is rated for 15 passengers, while the Beneteau Oceanis Clipper 411 2008 caps at 12. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis 50 2014 could be the deciding factor.
Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis 50 2014 displaces 27 454 lbs - a 10 258-lb difference over the Beneteau Oceanis Clipper 411 2008 at 17 196 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.
Both boats draw a similar depth - 5,6 ft and 4,8 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.
The Beneteau Oceanis 50 2014 uses Fractional Sloop rigging. The Beneteau Oceanis 50 2014 has a documented auxiliary engine of 76 hp.
Bottom line: The Beneteau Oceanis 50 2014 is the offshore and bluewater choice - at 27 454 lbs displacement and 50 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau Oceanis Clipper 411 2008 at 17 196 lbs is the more nimble, accessible option - easier to single-hand and better suited to coastal and inland sailing.