The Beneteau Oceanis 461 1994 vs Beneteau Oceanis Clipper 331 1999 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis 461 1994 measures 45,1 feet overall (1994), giving it roughly 10,9 additional feet of deck space compared to the Beneteau Oceanis Clipper 331 1999 at 34,2 feet (1999). Weight tells a clearer story for trailering families: the Beneteau Oceanis 461 1994 tips the scales at 20 944 lbs — 9 700 lbs more than the Beneteau Oceanis Clipper 331 1999 at 11 244 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 85 hp, the Beneteau Oceanis 461 1994 has a 55-hp advantage over the Beneteau Oceanis Clipper 331 1999's 30-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Beneteau Oceanis 461 1994 carries 53 gallons versus 19 gallons in the Beneteau Oceanis Clipper 331 1999. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis 461 1994 is rated for 13 passengers, while the Beneteau Oceanis Clipper 331 1999 caps at 10. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis 461 1994 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis 461 1994 displaces 20 944 lbs — a 9 700-lb difference over the Beneteau Oceanis Clipper 331 1999 at 11 244 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Both boats draw a similar depth — 5,8 ft and 5,5 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Beneteau Oceanis 461 1994 uses Sloop rigging. For auxiliary power the Beneteau Oceanis 461 1994 carries a 85-hp engine against 30 hp on the Beneteau Oceanis Clipper 331 1999. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

Hull speed is rated at 8,4 knots for the Beneteau Oceanis 461 1994 and 7,4 knots for the Beneteau Oceanis Clipper 331 1999. For extended cruising, water capacity matters: the Beneteau Oceanis 461 1994 carries 217 gallons versus 78 gallons on the Beneteau Oceanis Clipper 331 1999 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.