Beneteau Oceanis 43 2010 boat specs
Beneteau
Beneteau Oceanis 43 2010
2010
View full specs →
VS
Beneteau R/C 32 1980 boat specs
Beneteau
Beneteau R/C 32 1980
1980
View full specs →

Beneteau Oceanis 43 2010 vs Beneteau R/C 32 1980 — Same Brand, Different Boat

The Beneteau Oceanis 43 2010 vs Beneteau R/C 32 1980 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis 43 2010 measures 42,1 feet overall (2010), giving it roughly 9,0 additional feet of deck space compared to the Beneteau R/C 32 1980 at 33,1 feet (1980). Weight tells a clearer story for trailering families: the Beneteau Oceanis 43 2010 tips the scales at 19 561 lbs — 11 183 lbs more than the Beneteau R/C 32 1980 at 8 378 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 54 hp, the Beneteau Oceanis 43 2010 has a 29-hp advantage over the Beneteau R/C 32 1980's 25-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Beneteau Oceanis 43 2010 carries 53 gallons versus 12 gallons in the Beneteau R/C 32 1980. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis 43 2010 is rated for 12 passengers, while the Beneteau R/C 32 1980 caps at 10. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis 43 2010 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis 43 2010 displaces 19 561 lbs — a 11 183-lb difference over the Beneteau R/C 32 1980 at 8 378 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau Oceanis 43 2010 draws 6,6 ft, compared to 4,5 ft for the Beneteau R/C 32 1980. That 2,1-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

For auxiliary power the Beneteau Oceanis 43 2010 carries a 54-hp engine against 25 hp on the Beneteau R/C 32 1980. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

For extended cruising, water capacity matters: the Beneteau Oceanis 43 2010 carries 95 gallons versus 53 gallons on the Beneteau R/C 32 1980 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.

Bottom line: The Beneteau Oceanis 43 2010 is the offshore and bluewater choice — at 19 561 lbs displacement and 42 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau R/C 32 1980 at 8 378 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.
Measurements / Dimensions
Length overall - Detail42.12 ft
Length overall - Detail33.11 ft
Length - Feet42.12
Length - Feet33.11
Length overall - Meters12.84
Length overall - Meters10.09
Length overall - Inches505
Length overall - Inches397
Beam13.60 ft
Beam11.10 ft
Beam - Meters4.15
Beam - Meters3.38
Beam - Inches163
Beam - Inches133
Draft [max] - Detail6.58 ft
Draft [max] - Detail4.50 ft
Draft [max] - Meters2.01
Draft [max] - Meters1.37
Draft [max] - Inches79
Draft [max] - Inches54
Displacement19561.00 lbs
Displacement8378.00 lbs
Engine and Drivetrain
Fuel tank capacity - Gal52.83
Fuel tank capacity - Gal11.9
Fuel tank capacity - Liters199.98
Fuel tank capacity - Liters45.05
Engine makeYanmar
Engine makenot available
Horsepower54 hp
Horsepower25 hp
Fuel typeDiesel
Fuel typeDiesel
Drive typenot available
Drive typeinboard
Operational Info
Sleeping capacity7
Sleeping capacity5
Cabins3
Cabins2
Head2
Head1
Water capacity95.1
Water capacity52.8
Boat typeSail
Boat typeSail
Riggingnot available
RiggingSloop
Mast Configurationnot available
Mast ConfigurationDeck stepped mast
Body / Hull
Ruddernot available
Rudder1 spade rudder
Helmnot available
Helm1 tiller
Performance
Maximum speednot available
Maximum speed7.08
Maximum speed measurenot available
Maximum speed measureknots

Beneteau Oceanis 43 2010 vs Beneteau R/C 32 1980 — Common Questions

Which is the larger boat — the Beneteau Oceanis 43 2010 or the Beneteau R/C 32 1980?
The Beneteau Oceanis 43 2010 is the longer of the two at 42,1 feet overall. The Beneteau R/C 32 1980 comes in at 33,1 feet, making it roughly 9,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Beneteau Oceanis 43 2010 or the Beneteau R/C 32 1980?
For trailering, the Beneteau R/C 32 1980 has the edge at 8 378 lbs dry weight versus 19 561 lbs for the Beneteau Oceanis 43 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Beneteau Oceanis 43 2010 is rated to a maximum of 54 hp, giving it the larger power ceiling. The Beneteau R/C 32 1980 tops out at 25 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Beneteau Oceanis 43 2010 is Coast Guard rated for 12 passengers, while the Beneteau R/C 32 1980 is certified for 10. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the deeper draft — the Beneteau Oceanis 43 2010 or the Beneteau R/C 32 1980?
The Beneteau Oceanis 43 2010 has the deeper draft at 6,6 ft, versus 4,5 ft for the Beneteau R/C 32 1980. A deeper draft generally means better upwind performance and stability, but limits access to shallow anchorages and some marina berths. Always check the controlling depth of your home port and favourite cruising grounds before committing.
Is the Beneteau Oceanis 43 2010 or the Beneteau R/C 32 1980 better suited for offshore sailing?
For offshore work, displacement and construction are the primary indicators. The Beneteau Oceanis 43 2010 at 19 561 lbs displacement is the heavier, more load-carrying design — generally better suited to extended passages where seakeeping and provisioning capacity matter most. The Beneteau R/C 32 1980 at 8 378 lbs will typically be livelier and more responsive in lighter conditions.
Which boat is better equipped for long-distance cruising?
For extended passages, fresh water capacity is a key indicator of cruising readiness. The Beneteau Oceanis 43 2010 carries 95 gallons of fresh water compared to 53 gallons on the Beneteau R/C 32 1980 — a meaningful advantage when watermaker installations or port stops aren't guaranteed.
Which boat is wider, and does it affect trailering?
The Beneteau Oceanis 43 2010 measures 163" wide, compared to 133" for the Beneteau R/C 32 1980. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Which boat has the larger fuel tank — the Beneteau Oceanis 43 2010 or the Beneteau R/C 32 1980?
The Beneteau Oceanis 43 2010 has the bigger tank at 53 gallons, versus 12 gallons on the Beneteau R/C 32 1980. That 40-gallon difference translates to roughly 122–204 nautical miles of additional range at cruising speed, depending on motor, load, and conditions.
Are the Beneteau Oceanis 43 2010 and Beneteau R/C 32 1980 from the same manufacturer?
Yes — both the Beneteau Oceanis 43 2010 and the Beneteau R/C 32 1980 are built by Beneteau. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.