Beneteau Oceanis 40 2014 boat specs
Beneteau
Beneteau Oceanis 40 2014
2014
View full specs →
VS
Beneteau Oceanis 48 2011 boat specs
Beneteau
Beneteau Oceanis 48 2011
2011
View full specs →

Beneteau Oceanis 40 2014 vs Beneteau Oceanis 48 2011 — Same Brand, Different Boat

The Beneteau Oceanis 40 2014 vs Beneteau Oceanis 48 2011 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis 48 2011 measures 47,1 feet overall (2011), giving it roughly 7,1 additional feet of deck space compared to the Beneteau Oceanis 40 2014 at 40,0 feet (2014). Weight tells a clearer story for trailering families: the Beneteau Oceanis 48 2011 tips the scales at 27 765 lbs — 10 834 lbs less than the Beneteau Oceanis 40 2014 at 16 931 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 75 hp, the Beneteau Oceanis 48 2011 has a 35-hp advantage over the Beneteau Oceanis 40 2014's 40-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Both carry nearly identical fuel loads — 53 gal and 53 gal — so range won't be a tiebreaker here.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis 48 2011 is rated for 14 passengers, while the Beneteau Oceanis 40 2014 caps at 12. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis 48 2011 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis 48 2011 displaces 27 765 lbs — a 10 834-lb difference over the Beneteau Oceanis 40 2014 at 16 931 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Both boats draw a similar depth — 6,4 ft and 7,1 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

For auxiliary power the Beneteau Oceanis 48 2011 carries a 75-hp engine against 40 hp on the Beneteau Oceanis 40 2014. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

Bottom line: The Beneteau Oceanis 48 2011 is the offshore and bluewater choice — at 27 765 lbs displacement and 47 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau Oceanis 40 2014 at 16 931 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.
Measurements / Dimensions
Length overall - Detail40.00 ft
Length overall - Detail47.11 ft
Length - Feet40
Length - Feet47.11
Length overall - Meters12.19
Length overall - Meters14.36
Length overall - Inches480
Length overall - Inches565
Beam13.00 ft
Beam15.70 ft
Beam - Meters3.96
Beam - Meters4.79
Beam - Inches156
Beam - Inches188
Draft [max] - Detail6.40 ft
Draft [max] - Detail7.10 ft
Draft [max] - Meters1.95
Draft [max] - Meters2.16
Draft [max] - Inches77
Draft [max] - Inches85
Draft Min5.20 ft
Draft Min6.00 ft
Displacement16931.00 lbs
Displacement27765.00 lbs
Engine and Drivetrain
Fuel tank capacity - Gal53
Fuel tank capacity - Gal53
Fuel tank capacity - Liters200.63
Fuel tank capacity - Liters200.63
Horsepower40 hp
Horsepower75 hp
Fuel typenot available
Fuel typeDiesel
Drive typenot available
Drive typeinboard
Operational Info
Sleeping capacity6
Sleeping capacity4
Cabins3
Cabins2
Head1
Head1
Water capacity95
Water capacity98
Boat typeSail
Boat typeSail
Holding tank capacity - Galnot available
Holding tank capacity - Gal16.9
Holding tank capacity - Litersnot available
Holding tank capacity - Liters63.97
Riggingnot available
RiggingSloop
Mast Configurationnot available
Mast ConfigurationDeck stepped mast
Body / Hull
Ruddernot available
Rudder1 spade rudder
Helmnot available
Helm2 wheels
Performance
Maximum speednot available
Maximum speed9.04
Maximum speed measurenot available
Maximum speed measureknots

Beneteau Oceanis 40 2014 vs Beneteau Oceanis 48 2011 — Common Questions

Which is the larger boat — the Beneteau Oceanis 40 2014 or the Beneteau Oceanis 48 2011?
The Beneteau Oceanis 48 2011 is the longer of the two at 47,1 feet overall. The Beneteau Oceanis 40 2014 comes in at 40,0 feet, making it roughly 7,1 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Beneteau Oceanis 40 2014 or the Beneteau Oceanis 48 2011?
For trailering, the Beneteau Oceanis 40 2014 has the edge at 16 931 lbs dry weight versus 27 765 lbs for the Beneteau Oceanis 48 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Beneteau Oceanis 48 2011 is rated to a maximum of 75 hp, giving it the larger power ceiling. The Beneteau Oceanis 40 2014 tops out at 40 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Beneteau Oceanis 40 2014 is Coast Guard rated for 12 passengers, while the Beneteau Oceanis 48 2011 is certified for 14. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the deeper draft — the Beneteau Oceanis 40 2014 or the Beneteau Oceanis 48 2011?
The Beneteau Oceanis 48 2011 has the deeper draft at 7,1 ft, versus 6,4 ft for the Beneteau Oceanis 40 2014. A deeper draft generally means better upwind performance and stability, but limits access to shallow anchorages and some marina berths. Always check the controlling depth of your home port and favourite cruising grounds before committing.
Is the Beneteau Oceanis 40 2014 or the Beneteau Oceanis 48 2011 better suited for offshore sailing?
For offshore work, displacement and construction are the primary indicators. The Beneteau Oceanis 48 2011 at 27 765 lbs displacement is the heavier, more load-carrying design — generally better suited to extended passages where seakeeping and provisioning capacity matter most. The Beneteau Oceanis 40 2014 at 16 931 lbs will typically be livelier and more responsive in lighter conditions.
Which boat is wider, and does it affect trailering?
The Beneteau Oceanis 48 2011 measures 188" wide, compared to 156" for the Beneteau Oceanis 40 2014. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
How do the fuel tanks compare on the Beneteau Oceanis 40 2014 and Beneteau Oceanis 48 2011?
Both boats carry similar fuel loads — 53 gallons and 53 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.
Are the Beneteau Oceanis 40 2014 and Beneteau Oceanis 48 2011 from the same manufacturer?
Yes — both the Beneteau Oceanis 40 2014 and the Beneteau Oceanis 48 2011 are built by Beneteau. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.