The Beneteau Oceanis 38 2013 vs Beneteau Oceanis Clipper 411 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.
Size is the most obvious dividing line here. The Beneteau Oceanis Clipper 411 2008 measures 41,0 feet overall (2008), giving it roughly 3,2 additional feet of deck space compared to the Beneteau Oceanis 38 2013 at 37,8 feet (2013). Weight tells a clearer story for trailering families: the Beneteau Oceanis Clipper 411 2008 tips the scales at 17 196 lbs — 2 094 lbs less than the Beneteau Oceanis 38 2013 at 15 102 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The Beneteau Oceanis 38 2013 carries a rated maximum of 30 hp. Engine data for the Beneteau Oceanis Clipper 411 2008 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.Fuel capacity breaks the other way: the Beneteau Oceanis Clipper 411 2008 carries 45 gallons versus 34 gallons in the Beneteau Oceanis 38 2013. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis Clipper 411 2008 is rated for 12 passengers, while the Beneteau Oceanis 38 2013 caps at 11. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis Clipper 411 2008 could be the deciding factor.
Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis Clipper 411 2008 displaces 17 196 lbs — a 2 094-lb difference over the Beneteau Oceanis 38 2013 at 15 102 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.
Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau Oceanis 38 2013 draws 6,1 ft, compared to 4,8 ft for the Beneteau Oceanis Clipper 411 2008. That 1,4-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.
The Beneteau Oceanis 38 2013 uses Sloop rigging. The Beneteau Oceanis 38 2013 has a documented auxiliary engine of 30 hp.
For extended cruising, water capacity matters: the Beneteau Oceanis Clipper 411 2008 carries 151 gallons versus 34 gallons on the Beneteau Oceanis 38 2013 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.
Bottom line: The Beneteau Oceanis Clipper 411 2008 is the offshore and bluewater choice — at 17 196 lbs displacement and 41 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau Oceanis 38 2013 at 15 102 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.