The Beneteau Oceanis 38 2013 vs Beneteau Oceanis 40 CC 1995 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis 40 CC 1995 measures 41,0 feet overall (1995), giving it roughly 3,2 additional feet of deck space compared to the Beneteau Oceanis 38 2013 at 37,8 feet (2013). Weight tells a clearer story for trailering families: the Beneteau Oceanis 40 CC 1995 tips the scales at 18 739 lbs — 3 637 lbs less than the Beneteau Oceanis 38 2013 at 15 102 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 30 hp for the Beneteau Oceanis 38 2013 and 50 hp for the Beneteau Oceanis 40 CC 1995. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the Beneteau Oceanis 40 CC 1995 carries 53 gallons versus 34 gallons in the Beneteau Oceanis 38 2013. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis 40 CC 1995 is rated for 12 passengers, while the Beneteau Oceanis 38 2013 caps at 11. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis 40 CC 1995 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis 40 CC 1995 displaces 18 739 lbs — a 3 637-lb difference over the Beneteau Oceanis 38 2013 at 15 102 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Both boats draw a similar depth — 6,1 ft and 5,7 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Beneteau Oceanis 38 2013 uses Sloop rigging. Helm style differs too: the Beneteau Oceanis 38 2013 uses a 2 wheels versus a 1 wheel on the Beneteau Oceanis 40 CC 1995. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. For auxiliary power the Beneteau Oceanis 40 CC 1995 carries a 50-hp engine against 30 hp on the Beneteau Oceanis 38 2013. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

Hull speed is rated at 8,1 knots for the Beneteau Oceanis 40 CC 1995 and 8,0 knots for the Beneteau Oceanis 38 2013. For extended cruising, water capacity matters: the Beneteau Oceanis 40 CC 1995 carries 132 gallons versus 34 gallons on the Beneteau Oceanis 38 2013 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.