The Beneteau Oceanis 30.1 2021 vs Beneteau Oceanis Clipper 331 1999 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — Beneteau Oceanis 30.1 2021 at 31,4 ft versus Beneteau Oceanis Clipper 331 1999 at 34,2 ft. Weight tells a clearer story for trailering families: the Beneteau Oceanis Clipper 331 1999 tips the scales at 11 244 lbs — 2 437 lbs less than the Beneteau Oceanis 30.1 2021 at 8 807 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 21 hp for the Beneteau Oceanis 30.1 2021 and 30 hp for the Beneteau Oceanis Clipper 331 1999. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the Beneteau Oceanis 30.1 2021 carries 34 gallons versus 19 gallons in the Beneteau Oceanis Clipper 331 1999. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis Clipper 331 1999 is rated for 10 passengers, while the Beneteau Oceanis 30.1 2021 caps at 9. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis Clipper 331 1999 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis Clipper 331 1999 displaces 11 244 lbs — a 2 437-lb difference over the Beneteau Oceanis 30.1 2021 at 8 807 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Both boats draw a similar depth — 6,2 ft and 5,5 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Beneteau Oceanis 30.1 2021 uses Sloop rigging. Helm style differs too: the Beneteau Oceanis 30.1 2021 uses a 1 tiller (helm wheel in option) versus a 1 wheel on the Beneteau Oceanis Clipper 331 1999. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. For auxiliary power the Beneteau Oceanis Clipper 331 1999 carries a 30-hp engine against 21 hp on the Beneteau Oceanis 30.1 2021. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

Hull speed is rated at 7,4 knots for the Beneteau Oceanis Clipper 331 1999 and 7,1 knots for the Beneteau Oceanis 30.1 2021. For extended cruising, water capacity matters: the Beneteau Oceanis Clipper 331 1999 carries 78 gallons versus 42 gallons on the Beneteau Oceanis 30.1 2021 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.