Beneteau First Class Europe 0 boat specs
Beneteau
Beneteau First Class Europe 0
View full specs →
VS
Beneteau Sense 50 2010 boat specs
Beneteau
Beneteau Sense 50 2010
2010
View full specs →

Beneteau First Class Europe 0 vs Beneteau Sense 50 2010 — Same Brand, Different Boat

The Beneteau First Class Europe 0 vs Beneteau Sense 50 2010 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Sense 50 2010 measures 50,1 feet overall (2010), giving it roughly 12,8 additional feet of deck space compared to the Beneteau First Class Europe 0 at 37,3 feet. Weight tells a clearer story for trailering families: the Beneteau Sense 50 2010 tips the scales at 33 720 lbs — 26 886 lbs less than the Beneteau First Class Europe 0 at 6 834 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Beneteau Sense 50 2010 tops out at 75 hp. Engine specs for the Beneteau First Class Europe 0 aren't listed — confirm with a dealer before selecting an outboard.

For family outings this is probably the sharpest distinction between the two. The Beneteau Sense 50 2010 is rated for 15 passengers, while the Beneteau First Class Europe 0 caps at 11. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Sense 50 2010 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Sense 50 2010 displaces 33 720 lbs — a 26 886-lb difference over the Beneteau First Class Europe 0 at 6 834 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Both boats draw a similar depth — 6,2 ft and 7,2 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Beneteau First Class Europe 0 is rigged as a Fractional Sloop while the Beneteau Sense 50 2010 carries Sloop rigging — a meaningful difference in sail handling complexity, upwind performance, and the size of crew you'll need to work the boat comfortably. The Beneteau Sense 50 2010 has a documented auxiliary engine of 75 hp.

Bottom line: The Beneteau Sense 50 2010 is the offshore and bluewater choice — at 33 720 lbs displacement and 50 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau First Class Europe 0 at 6 834 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.
Measurements / Dimensions
Length overall - Detail37.34 ft
Length overall - Detail50.10 ft
Length - Feet37.34
Length - Feet50.1
Length overall - Meters11.38
Length overall - Meters15.27
Length overall - Inches448
Length overall - Inches601
Beam11.06 ft
Beam15.11 ft
Beam - Meters3.37
Beam - Meters4.61
Beam - Inches133
Beam - Inches181
Draft [max] - Detail6.23 ft
Draft [max] - Detail7.20 ft
Draft [max] - Meters1.9
Draft [max] - Meters2.19
Draft [max] - Inches75
Draft [max] - Inches86
Displacement6834.00 lbs
Displacement33720.00 lbs
Operational Info
RiggingFractional Sloop
RiggingSloop
Boat typeSail
Boat typeSail
Sleeping capacitynot available
Sleeping capacity4
Cabinsnot available
Cabins2
Headnot available
Head1
Water capacitynot available
Water capacity150.6
Holding tank capacity - Galnot available
Holding tank capacity - Gal21.1
Holding tank capacity - Litersnot available
Holding tank capacity - Liters79.87
Mast Configurationnot available
Mast ConfigurationDeck stepped mast
Body / Hull
Ruddernot available
Rudder2 spade rudders
Helmnot available
Helm2 wheels
Engine and Drivetrain
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal109.6
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters414.88
Horsepowernot available
Horsepower75 hp
Fuel typenot available
Fuel typeDiesel
Drive typenot available
Drive typeinboard
Performance
Maximum speednot available
Maximum speed9.1
Maximum speed measurenot available
Maximum speed measureknots

Beneteau First Class Europe 0 vs Beneteau Sense 50 2010 — Common Questions

Which is the larger boat — the Beneteau First Class Europe 0 or the Beneteau Sense 50 2010?
The Beneteau Sense 50 2010 is the longer of the two at 50,1 feet overall. The Beneteau First Class Europe 0 comes in at 37,3 feet, making it roughly 12,8 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Beneteau First Class Europe 0 or the Beneteau Sense 50 2010?
For trailering, the Beneteau First Class Europe 0 has the edge at 6 834 lbs dry weight versus 33 720 lbs for the Beneteau Sense 50 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Beneteau Sense 50 2010 has a documented max rating of 75 hp. Engine specifications for the Beneteau First Class Europe 0 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Beneteau First Class Europe 0 is Coast Guard rated for 11 passengers, while the Beneteau Sense 50 2010 is certified for 15. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the deeper draft — the Beneteau First Class Europe 0 or the Beneteau Sense 50 2010?
The Beneteau Sense 50 2010 has the deeper draft at 7,2 ft, versus 6,2 ft for the Beneteau First Class Europe 0. A deeper draft generally means better upwind performance and stability, but limits access to shallow anchorages and some marina berths. Always check the controlling depth of your home port and favourite cruising grounds before committing.
Is the Beneteau First Class Europe 0 or the Beneteau Sense 50 2010 better suited for offshore sailing?
For offshore work, displacement and construction are the primary indicators. The Beneteau Sense 50 2010 at 33 720 lbs displacement is the heavier, more load-carrying design — generally better suited to extended passages where seakeeping and provisioning capacity matter most. The Beneteau First Class Europe 0 at 6 834 lbs will typically be livelier and more responsive in lighter conditions.
Which boat is wider, and does it affect trailering?
The Beneteau Sense 50 2010 measures 181" wide, compared to 133" for the Beneteau First Class Europe 0. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Beneteau First Class Europe 0 and Beneteau Sense 50 2010 from the same manufacturer?
Yes — both the Beneteau First Class Europe 0 and the Beneteau Sense 50 2010 are built by Beneteau. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.