Beneteau First Class Europe 0 boat specs
Beneteau
Beneteau First Class Europe 0
View full specs →
VS
Beneteau Oceanis 40 CC 1995 boat specs
Beneteau
Beneteau Oceanis 40 CC 1995
1995
View full specs →

Beneteau First Class Europe 0 vs Beneteau Oceanis 40 CC 1995 — Same Brand, Different Boat

The Beneteau First Class Europe 0 vs Beneteau Oceanis 40 CC 1995 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis 40 CC 1995 measures 41,0 feet overall (1995), giving it roughly 3,7 additional feet of deck space compared to the Beneteau First Class Europe 0 at 37,3 feet. Weight tells a clearer story for trailering families: the Beneteau Oceanis 40 CC 1995 tips the scales at 18 739 lbs — 11 905 lbs less than the Beneteau First Class Europe 0 at 6 834 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Beneteau Oceanis 40 CC 1995 tops out at 50 hp. Engine specs for the Beneteau First Class Europe 0 aren't listed — confirm with a dealer before selecting an outboard.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis 40 CC 1995 is rated for 12 passengers, while the Beneteau First Class Europe 0 caps at 11. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis 40 CC 1995 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis 40 CC 1995 displaces 18 739 lbs — a 11 905-lb difference over the Beneteau First Class Europe 0 at 6 834 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Both boats draw a similar depth — 6,2 ft and 5,7 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Beneteau First Class Europe 0 is rigged as a Fractional Sloop while the Beneteau Oceanis 40 CC 1995 carries Sloop rigging — a meaningful difference in sail handling complexity, upwind performance, and the size of crew you'll need to work the boat comfortably. The Beneteau Oceanis 40 CC 1995 has a documented auxiliary engine of 50 hp.

Bottom line: The Beneteau Oceanis 40 CC 1995 is the offshore and bluewater choice — at 18 739 lbs displacement and 41 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau First Class Europe 0 at 6 834 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.
Measurements / Dimensions
Length overall - Detail37.34 ft
Length overall - Detail41.00 ft
Length - Feet37.34
Length - Feet41
Length overall - Meters11.38
Length overall - Meters12.5
Length overall - Inches448
Length overall - Inches492
Beam11.06 ft
Beam13.00 ft
Beam - Meters3.37
Beam - Meters3.96
Beam - Inches133
Beam - Inches156
Draft [max] - Detail6.23 ft
Draft [max] - Detail5.70 ft
Draft [max] - Meters1.9
Draft [max] - Meters1.74
Draft [max] - Inches75
Draft [max] - Inches68
Displacement6834.00 lbs
Displacement18739.00 lbs
Operational Info
RiggingFractional Sloop
RiggingSloop
Boat typeSail
Boat typeSail
Sleeping capacitynot available
Sleeping capacity4
Cabinsnot available
Cabins2
Headnot available
Head1
Water capacitynot available
Water capacity132.1
Mast Configurationnot available
Mast ConfigurationDeck stepped mast
Body / Hull
Ruddernot available
Rudder1 spade rudder
Helmnot available
Helm1 wheel
Engine and Drivetrain
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal52.8
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters199.87
Horsepowernot available
Horsepower50 hp
Fuel typenot available
Fuel typeDiesel
Drive typenot available
Drive typeinboard
Performance
Maximum speednot available
Maximum speed8.12
Maximum speed measurenot available
Maximum speed measureknots

Beneteau First Class Europe 0 vs Beneteau Oceanis 40 CC 1995 — Common Questions

Which is the larger boat — the Beneteau First Class Europe 0 or the Beneteau Oceanis 40 CC 1995?
The Beneteau Oceanis 40 CC 1995 is the longer of the two at 41,0 feet overall. The Beneteau First Class Europe 0 comes in at 37,3 feet, making it roughly 3,7 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Beneteau First Class Europe 0 or the Beneteau Oceanis 40 CC 1995?
For trailering, the Beneteau First Class Europe 0 has the edge at 6 834 lbs dry weight versus 18 739 lbs for the Beneteau Oceanis 40 CC 1995. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Beneteau Oceanis 40 CC 1995 has a documented max rating of 50 hp. Engine specifications for the Beneteau First Class Europe 0 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Beneteau First Class Europe 0 is Coast Guard rated for 11 passengers, while the Beneteau Oceanis 40 CC 1995 is certified for 12. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the deeper draft — the Beneteau First Class Europe 0 or the Beneteau Oceanis 40 CC 1995?
The Beneteau First Class Europe 0 has the deeper draft at 6,2 ft, versus 5,7 ft for the Beneteau Oceanis 40 CC 1995. A deeper draft generally means better upwind performance and stability, but limits access to shallow anchorages and some marina berths. Always check the controlling depth of your home port and favourite cruising grounds before committing.
Is the Beneteau First Class Europe 0 or the Beneteau Oceanis 40 CC 1995 better suited for offshore sailing?
For offshore work, displacement and construction are the primary indicators. The Beneteau Oceanis 40 CC 1995 at 18 739 lbs displacement is the heavier, more load-carrying design — generally better suited to extended passages where seakeeping and provisioning capacity matter most. The Beneteau First Class Europe 0 at 6 834 lbs will typically be livelier and more responsive in lighter conditions.
Which boat is wider, and does it affect trailering?
The Beneteau Oceanis 40 CC 1995 measures 156" wide, compared to 133" for the Beneteau First Class Europe 0. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Beneteau First Class Europe 0 and Beneteau Oceanis 40 CC 1995 from the same manufacturer?
Yes — both the Beneteau First Class Europe 0 and the Beneteau Oceanis 40 CC 1995 are built by Beneteau. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.