The Beneteau First Class 7.5 2008 vs Beneteau Oceanis Clipper 361 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.
Size is the most obvious dividing line here. The Beneteau Oceanis Clipper 361 2008 measures 36,4 feet overall (2008), giving it roughly 10,5 additional feet of deck space compared to the Beneteau First Class 7.5 2008 at 25,9 feet (2008). Weight tells a clearer story for trailering families: the Beneteau Oceanis Clipper 361 2008 tips the scales at 13 349 lbs — 10 770 lbs less than the Beneteau First Class 7.5 2008 at 2 579 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The Beneteau Oceanis Clipper 361 2008 tops out at 30 hp. Engine specs for the Beneteau First Class 7.5 2008 aren't listed — confirm with a dealer before selecting an outboard.
For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis Clipper 361 2008 is rated for 11 passengers, while the Beneteau First Class 7.5 2008 caps at 7. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis Clipper 361 2008 could be the deciding factor.
Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis Clipper 361 2008 displaces 13 349 lbs — a 10 770-lb difference over the Beneteau First Class 7.5 2008 at 2 579 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.
Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau First Class 7.5 2008 draws 6,7 ft, compared to 5,0 ft for the Beneteau Oceanis Clipper 361 2008. That 1,7-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.
The Beneteau First Class 7.5 2008 uses Fractional Sloop rigging. The Beneteau Oceanis Clipper 361 2008 has a documented auxiliary engine of 30 hp.
Bottom line: The Beneteau Oceanis Clipper 361 2008 is the offshore and bluewater choice — at 13 349 lbs displacement and 36 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau First Class 7.5 2008 at 2 579 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.