Beneteau First Class 7.5 2008 boat specs
Beneteau
Beneteau First Class 7.5 2008
2008
View full specs →
VS
Beneteau Oceanis 45 2011 boat specs
Beneteau
Beneteau Oceanis 45 2011
2011
View full specs →

Beneteau First Class 7.5 2008 vs Beneteau Oceanis 45 2011 — Same Brand, Different Boat

The Beneteau First Class 7.5 2008 vs Beneteau Oceanis 45 2011 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis 45 2011 measures 45,9 feet overall (2011), giving it roughly 20,0 additional feet of deck space compared to the Beneteau First Class 7.5 2008 at 25,9 feet (2008). Weight tells a clearer story for trailering families: the Beneteau Oceanis 45 2011 tips the scales at 23 257 lbs — 20 678 lbs less than the Beneteau First Class 7.5 2008 at 2 579 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Beneteau Oceanis 45 2011 tops out at 54 hp. Engine specs for the Beneteau First Class 7.5 2008 aren't listed — confirm with a dealer before selecting an outboard.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis 45 2011 is rated for 13 passengers, while the Beneteau First Class 7.5 2008 caps at 7. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis 45 2011 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis 45 2011 displaces 23 257 lbs — a 20 678-lb difference over the Beneteau First Class 7.5 2008 at 2 579 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Both boats draw a similar depth — 6,7 ft and 7,5 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Beneteau First Class 7.5 2008 is rigged as a Fractional Sloop while the Beneteau Oceanis 45 2011 carries Sloop rigging — a meaningful difference in sail handling complexity, upwind performance, and the size of crew you'll need to work the boat comfortably. The Beneteau Oceanis 45 2011 has a documented auxiliary engine of 54 hp.

Bottom line: The Beneteau Oceanis 45 2011 is the offshore and bluewater choice — at 23 257 lbs displacement and 46 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau First Class 7.5 2008 at 2 579 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.
Measurements / Dimensions
Length overall - Detail25.92 ft
Length overall - Detail45.90 ft
Length - Feet25.92
Length - Feet45.9
Length overall - Meters7.9
Length overall - Meters13.99
Length overall - Inches311
Length overall - Inches551
Beam8.33 ft
Beam14.90 ft
Beam - Meters2.54
Beam - Meters4.54
Beam - Inches100
Beam - Inches179
Draft [max] - Detail6.73 ft
Draft [max] - Detail7.50 ft
Draft [max] - Meters2.05
Draft [max] - Meters2.29
Draft [max] - Inches81
Draft [max] - Inches90
Draft Min2.95 ft
Draft Min5.90 ft
Displacement2579.00 lbs
Displacement23257.00 lbs
Operational Info
RiggingFractional Sloop
RiggingSloop
Boat typeSail
Boat typeSail
Sleeping capacitynot available
Sleeping capacity4
Cabinsnot available
Cabins2
Headnot available
Head2
Water capacitynot available
Water capacity97.7
Holding tank capacity - Galnot available
Holding tank capacity - Gal21.1
Holding tank capacity - Litersnot available
Holding tank capacity - Liters79.87
Mast Configurationnot available
Mast ConfigurationDeck stepped mast
Body / Hull
Ruddernot available
Rudder1 spade rudder
Helmnot available
Helm2 wheels
Engine and Drivetrain
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal52.8
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters199.87
Horsepowernot available
Horsepower54 hp
Fuel typenot available
Fuel typeDiesel
Drive typenot available
Drive typeinboard
Performance
Maximum speednot available
Maximum speed8.74
Maximum speed measurenot available
Maximum speed measureknots

Beneteau First Class 7.5 2008 vs Beneteau Oceanis 45 2011 — Common Questions

Which is the larger boat — the Beneteau First Class 7.5 2008 or the Beneteau Oceanis 45 2011?
The Beneteau Oceanis 45 2011 is the longer of the two at 45,9 feet overall. The Beneteau First Class 7.5 2008 comes in at 25,9 feet, making it roughly 20,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Beneteau First Class 7.5 2008 or the Beneteau Oceanis 45 2011?
For trailering, the Beneteau First Class 7.5 2008 has the edge at 2 579 lbs dry weight versus 23 257 lbs for the Beneteau Oceanis 45 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Beneteau Oceanis 45 2011 has a documented max rating of 54 hp. Engine specifications for the Beneteau First Class 7.5 2008 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Beneteau First Class 7.5 2008 is Coast Guard rated for 7 passengers, while the Beneteau Oceanis 45 2011 is certified for 13. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the deeper draft — the Beneteau First Class 7.5 2008 or the Beneteau Oceanis 45 2011?
The Beneteau Oceanis 45 2011 has the deeper draft at 7,5 ft, versus 6,7 ft for the Beneteau First Class 7.5 2008. A deeper draft generally means better upwind performance and stability, but limits access to shallow anchorages and some marina berths. Always check the controlling depth of your home port and favourite cruising grounds before committing.
Is the Beneteau First Class 7.5 2008 or the Beneteau Oceanis 45 2011 better suited for offshore sailing?
For offshore work, displacement and construction are the primary indicators. The Beneteau Oceanis 45 2011 at 23 257 lbs displacement is the heavier, more load-carrying design — generally better suited to extended passages where seakeeping and provisioning capacity matter most. The Beneteau First Class 7.5 2008 at 2 579 lbs will typically be livelier and more responsive in lighter conditions.
Which boat is wider, and does it affect trailering?
The Beneteau Oceanis 45 2011 measures 179" wide, compared to 100" for the Beneteau First Class 7.5 2008. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Beneteau First Class 7.5 2008 and Beneteau Oceanis 45 2011 from the same manufacturer?
Yes — both the Beneteau First Class 7.5 2008 and the Beneteau Oceanis 45 2011 are built by Beneteau. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.