Beneteau First Class 7.5 2008 boat specs
Beneteau
Beneteau First Class 7.5 2008
2008
View full specs →
VS
Beneteau Oceanis 41.1 2015 boat specs
Beneteau
Beneteau Oceanis 41.1 2015
2015
View full specs →

Beneteau First Class 7.5 2008 vs Beneteau Oceanis 41.1 2015 — Same Brand, Different Boat

The Beneteau First Class 7.5 2008 vs Beneteau Oceanis 41.1 2015 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis 41.1 2015 measures 40,9 feet overall (2015), giving it roughly 15,0 additional feet of deck space compared to the Beneteau First Class 7.5 2008 at 25,9 feet (2008). Weight tells a clearer story for trailering families: the Beneteau Oceanis 41.1 2015 tips the scales at 17 271 lbs — 14 692 lbs less than the Beneteau First Class 7.5 2008 at 2 579 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Beneteau Oceanis 41.1 2015 tops out at 45 hp. Engine specs for the Beneteau First Class 7.5 2008 aren't listed — confirm with a dealer before selecting an outboard.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis 41.1 2015 is rated for 12 passengers, while the Beneteau First Class 7.5 2008 caps at 7. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis 41.1 2015 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis 41.1 2015 displaces 17 271 lbs — a 14 692-lb difference over the Beneteau First Class 7.5 2008 at 2 579 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Both boats draw a similar depth — 6,7 ft and 7,2 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Beneteau First Class 7.5 2008 is rigged as a Fractional Sloop while the Beneteau Oceanis 41.1 2015 carries Sloop rigging — a meaningful difference in sail handling complexity, upwind performance, and the size of crew you'll need to work the boat comfortably. The Beneteau Oceanis 41.1 2015 has a documented auxiliary engine of 45 hp.

Bottom line: The Beneteau Oceanis 41.1 2015 is the offshore and bluewater choice — at 17 271 lbs displacement and 41 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau First Class 7.5 2008 at 2 579 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.
Measurements / Dimensions
Length overall - Detail25.92 ft
Length overall - Detail40.90 ft
Length - Feet25.92
Length - Feet40.9
Length overall - Meters7.9
Length overall - Meters12.47
Length overall - Inches311
Length overall - Inches491
Beam8.33 ft
Beam13.10 ft
Beam - Meters2.54
Beam - Meters3.99
Beam - Inches100
Beam - Inches157
Draft [max] - Detail6.73 ft
Draft [max] - Detail7.20 ft
Draft [max] - Meters2.05
Draft [max] - Meters2.19
Draft [max] - Inches81
Draft [max] - Inches86
Draft Min2.95 ft
Draft Minnot available
Displacement2579.00 lbs
Displacement17271.00 lbs
Operational Info
RiggingFractional Sloop
RiggingSloop
Boat typeSail
Boat typeSail
Sleeping capacitynot available
Sleeping capacity4
Cabinsnot available
Cabins2
Headnot available
Head1
Water capacitynot available
Water capacity63.4
Holding tank capacity - Galnot available
Holding tank capacity - Gal21.1
Holding tank capacity - Litersnot available
Holding tank capacity - Liters79.87
Mast Configurationnot available
Mast ConfigurationDeck stepped mast
Body / Hull
Ruddernot available
Rudder1 spade rudder
Helmnot available
Helm2 wheels
Engine and Drivetrain
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal52.8
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters199.87
Horsepowernot available
Horsepower45 hp
Fuel typenot available
Fuel typeDiesel
Drive typenot available
Drive typeinboard
Performance
Maximum speednot available
Maximum speed8.18
Maximum speed measurenot available
Maximum speed measureknots

Beneteau First Class 7.5 2008 vs Beneteau Oceanis 41.1 2015 — Common Questions

Which is the larger boat — the Beneteau First Class 7.5 2008 or the Beneteau Oceanis 41.1 2015?
The Beneteau Oceanis 41.1 2015 is the longer of the two at 40,9 feet overall. The Beneteau First Class 7.5 2008 comes in at 25,9 feet, making it roughly 15,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Beneteau First Class 7.5 2008 or the Beneteau Oceanis 41.1 2015?
For trailering, the Beneteau First Class 7.5 2008 has the edge at 2 579 lbs dry weight versus 17 271 lbs for the Beneteau Oceanis 41.1 2015. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Beneteau Oceanis 41.1 2015 has a documented max rating of 45 hp. Engine specifications for the Beneteau First Class 7.5 2008 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Beneteau First Class 7.5 2008 is Coast Guard rated for 7 passengers, while the Beneteau Oceanis 41.1 2015 is certified for 12. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the deeper draft — the Beneteau First Class 7.5 2008 or the Beneteau Oceanis 41.1 2015?
The Beneteau Oceanis 41.1 2015 has the deeper draft at 7,2 ft, versus 6,7 ft for the Beneteau First Class 7.5 2008. A deeper draft generally means better upwind performance and stability, but limits access to shallow anchorages and some marina berths. Always check the controlling depth of your home port and favourite cruising grounds before committing.
Is the Beneteau First Class 7.5 2008 or the Beneteau Oceanis 41.1 2015 better suited for offshore sailing?
For offshore work, displacement and construction are the primary indicators. The Beneteau Oceanis 41.1 2015 at 17 271 lbs displacement is the heavier, more load-carrying design — generally better suited to extended passages where seakeeping and provisioning capacity matter most. The Beneteau First Class 7.5 2008 at 2 579 lbs will typically be livelier and more responsive in lighter conditions.
Which boat is wider, and does it affect trailering?
The Beneteau Oceanis 41.1 2015 measures 157" wide, compared to 100" for the Beneteau First Class 7.5 2008. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Beneteau First Class 7.5 2008 and Beneteau Oceanis 41.1 2015 from the same manufacturer?
Yes — both the Beneteau First Class 7.5 2008 and the Beneteau Oceanis 41.1 2015 are built by Beneteau. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.