The Beneteau First 45F5 1990 vs Beneteau Oceanis Clipper 393 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau First 45F5 1990 measures 46,7 feet overall (1990), giving it roughly 8,5 additional feet of deck space compared to the Beneteau Oceanis Clipper 393 2008 at 38,2 feet (2008). Weight tells a clearer story for trailering families: the Beneteau First 45F5 1990 tips the scales at 23 149 lbs — 5 997 lbs more than the Beneteau Oceanis Clipper 393 2008 at 17 152 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 50 hp for the Beneteau First 45F5 1990 and 40 hp for the Beneteau Oceanis Clipper 393 2008. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the Beneteau First 45F5 1990 carries 42 gallons versus 36 gallons in the Beneteau Oceanis Clipper 393 2008. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Beneteau First 45F5 1990 is rated for 14 passengers, while the Beneteau Oceanis Clipper 393 2008 caps at 11. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau First 45F5 1990 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau First 45F5 1990 displaces 23 149 lbs — a 5 997-lb difference over the Beneteau Oceanis Clipper 393 2008 at 17 152 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau First 45F5 1990 draws 7,1 ft, compared to 5,1 ft for the Beneteau Oceanis Clipper 393 2008. That 2,0-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Beneteau First 45F5 1990 uses Sloop rigging. For auxiliary power the Beneteau First 45F5 1990 carries a 50-hp engine against 40 hp on the Beneteau Oceanis Clipper 393 2008. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

For extended cruising, water capacity matters: the Beneteau First 45F5 1990 carries 172 gallons versus 119 gallons on the Beneteau Oceanis Clipper 393 2008 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.