The Beneteau First 45F5 1990 vs Beneteau Oceanis Clipper 323 2003 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau First 45F5 1990 measures 46,7 feet overall (1990), giving it roughly 14,6 additional feet of deck space compared to the Beneteau Oceanis Clipper 323 2003 at 32,1 feet (2003). Weight tells a clearer story for trailering families: the Beneteau First 45F5 1990 tips the scales at 23 149 lbs — 13 823 lbs more than the Beneteau Oceanis Clipper 323 2003 at 9 326 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 50 hp, the Beneteau First 45F5 1990 has a 29-hp advantage over the Beneteau Oceanis Clipper 323 2003's 21-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Beneteau First 45F5 1990 carries 42 gallons versus 20 gallons in the Beneteau Oceanis Clipper 323 2003. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Beneteau First 45F5 1990 is rated for 14 passengers, while the Beneteau Oceanis Clipper 323 2003 caps at 9. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau First 45F5 1990 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau First 45F5 1990 displaces 23 149 lbs — a 13 823-lb difference over the Beneteau Oceanis Clipper 323 2003 at 9 326 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau First 45F5 1990 draws 7,1 ft, compared to 5,1 ft for the Beneteau Oceanis Clipper 323 2003. That 2,0-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Beneteau First 45F5 1990 uses Sloop rigging. For auxiliary power the Beneteau First 45F5 1990 carries a 50-hp engine against 21 hp on the Beneteau Oceanis Clipper 323 2003. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

Hull speed is rated at 8,1 knots for the Beneteau First 45F5 1990 and 7,2 knots for the Beneteau Oceanis Clipper 323 2003. For extended cruising, water capacity matters: the Beneteau First 45F5 1990 carries 172 gallons versus 42 gallons on the Beneteau Oceanis Clipper 323 2003 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.