The Beneteau First 40 2008 vs Beneteau Oceanis Clipper 473 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis Clipper 473 2008 measures 46,9 feet overall (2008), giving it roughly 5,5 additional feet of deck space compared to the Beneteau First 40 2008 at 41,4 feet (2008). Weight tells a clearer story for trailering families: the Beneteau Oceanis Clipper 473 2008 tips the scales at 24 277 lbs — 6 860 lbs less than the Beneteau First 40 2008 at 17 417 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Beneteau First 40 2008 carries a rated maximum of 40 hp. Engine data for the Beneteau Oceanis Clipper 473 2008 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.Fuel capacity breaks the other way: the Beneteau Oceanis Clipper 473 2008 carries 57 gallons versus 37 gallons in the Beneteau First 40 2008. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis Clipper 473 2008 is rated for 14 passengers, while the Beneteau First 40 2008 caps at 12. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis Clipper 473 2008 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis Clipper 473 2008 displaces 24 277 lbs — a 6 860-lb difference over the Beneteau First 40 2008 at 17 417 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau First 40 2008 draws 8,0 ft, compared to 5,6 ft for the Beneteau Oceanis Clipper 473 2008. That 2,4-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Beneteau First 40 2008 is rigged as a fractional_rig_sloop while the Beneteau Oceanis Clipper 473 2008 carries Masthead-sloop rigging — a meaningful difference in sail handling complexity, upwind performance, and the size of crew you'll need to work the boat comfortably. The Beneteau First 40 2008 has a documented auxiliary engine of 40 hp.

For extended cruising, water capacity matters: the Beneteau Oceanis Clipper 473 2008 carries 222 gallons versus 53 gallons on the Beneteau First 40 2008 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.