The Beneteau First 38S5 1989 vs Beneteau Oceanis 350 1985 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.
Size is the most obvious dividing line here. The Beneteau First 38S5 1989 measures 38,5 feet overall (1989), giving it roughly 5,4 additional feet of deck space compared to the Beneteau Oceanis 350 1985 at 33,1 feet (1985). Weight tells a clearer story for trailering families: the Beneteau First 38S5 1989 tips the scales at 14 551 lbs — 3 969 lbs more than the Beneteau Oceanis 350 1985 at 10 582 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
Both boats share a closely matched power ceiling — 43 hp for the Beneteau First 38S5 1989 and 27 hp for the Beneteau Oceanis 350 1985. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the Beneteau First 38S5 1989 carries 32 gallons versus 21 gallons in the Beneteau Oceanis 350 1985. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
For family outings this is probably the sharpest distinction between the two. The Beneteau First 38S5 1989 is rated for 11 passengers, while the Beneteau Oceanis 350 1985 caps at 10. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau First 38S5 1989 could be the deciding factor.
Displacement is where these two sailboats genuinely part ways. The Beneteau First 38S5 1989 displaces 14 551 lbs — a 3 969-lb difference over the Beneteau Oceanis 350 1985 at 10 582 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.
Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau First 38S5 1989 draws 6,2 ft, compared to 5,1 ft for the Beneteau Oceanis 350 1985. That 1,1-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.
The Beneteau First 38S5 1989 uses Sloop rigging. For auxiliary power the Beneteau First 38S5 1989 carries a 43-hp engine against 27 hp on the Beneteau Oceanis 350 1985. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.
Hull speed is rated at 7,4 knots for the Beneteau First 38S5 1989 and 7,3 knots for the Beneteau Oceanis 350 1985. For extended cruising, water capacity matters: the Beneteau First 38S5 1989 carries 98 gallons versus 79 gallons on the Beneteau Oceanis 350 1985 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.
Bottom line: The Beneteau First 38S5 1989 is the offshore and bluewater choice — at 14 551 lbs displacement and 39 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau Oceanis 350 1985 at 10 582 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.