The Beneteau First 375 1985 vs Beneteau Oceanis Clipper 373 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — Beneteau First 375 1985 at 38,1 ft versus Beneteau Oceanis Clipper 373 2008 at 36,9 ft. Weight tells a clearer story for trailering families: the Beneteau First 375 1985 tips the scales at 15 432 lbs — 815 lbs more than the Beneteau Oceanis Clipper 373 2008 at 14 617 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 43 hp for the Beneteau First 375 1985 and 40 hp for the Beneteau Oceanis Clipper 373 2008. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the Beneteau Oceanis Clipper 373 2008 carries 33 gallons versus 25 gallons in the Beneteau First 375 1985. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

Both boats are rated for 11 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Both boats sit in a similar displacement bracket — 15 432 lbs for the Beneteau First 375 1985 and 14 617 lbs for the Beneteau Oceanis Clipper 373 2008. Comparable displacement means broadly similar seakeeping behaviour and load capacity, though hull form and ballast ratio will still produce noticeably different sailing characteristics.

Both boats draw a similar depth — 6,6 ft and 6,1 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Beneteau First 375 1985 uses Sloop rigging.