The Beneteau First 345 1983 vs Beneteau Oceanis 55 2012 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.
Size is the most obvious dividing line here. The Beneteau Oceanis 55 2012 measures 55,1 feet overall (2012), giving it roughly 19,0 additional feet of deck space compared to the Beneteau First 345 1983 at 36,1 feet (1983). Weight tells a clearer story for trailering families: the Beneteau Oceanis 55 2012 tips the scales at 36 454 lbs — 25 210 lbs less than the Beneteau First 345 1983 at 11 244 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 75 hp, the Beneteau Oceanis 55 2012 has a 57-hp advantage over the Beneteau First 345 1983's 18-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Beneteau Oceanis 55 2012 carries 106 gallons versus 23 gallons in the Beneteau First 345 1983. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis 55 2012 is rated for 16 passengers, while the Beneteau First 345 1983 caps at 11. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis 55 2012 could be the deciding factor.
Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis 55 2012 displaces 36 454 lbs — a 25 210-lb difference over the Beneteau First 345 1983 at 11 244 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.
Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau Oceanis 55 2012 draws 7,6 ft, compared to 6,2 ft for the Beneteau First 345 1983. That 1,4-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.
The Beneteau First 345 1983 is rigged as a fractional_rig_sloop while the Beneteau Oceanis 55 2012 carries Sloop rigging — a meaningful difference in sail handling complexity, upwind performance, and the size of crew you'll need to work the boat comfortably. Helm style differs too: the Beneteau First 345 1983 uses a 1 tiller versus a 2 wheels on the Beneteau Oceanis 55 2012. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. For auxiliary power the Beneteau Oceanis 55 2012 carries a 75-hp engine against 18 hp on the Beneteau First 345 1983. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.
Hull speed is rated at 9,5 knots for the Beneteau Oceanis 55 2012 and 7,2 knots for the Beneteau First 345 1983. For extended cruising, water capacity matters: the Beneteau Oceanis 55 2012 carries 183 gallons versus 106 gallons on the Beneteau First 345 1983 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.
Bottom line: The Beneteau Oceanis 55 2012 is the offshore and bluewater choice — at 36 454 lbs displacement and 55 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau First 345 1983 at 11 244 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.