The Beneteau First 33.7 Deep draft 1996 vs Beneteau First 456 1982 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.
Size is the most obvious dividing line here. The Beneteau First 456 1982 measures 46,7 feet overall (1982), giving it roughly 13,9 additional feet of deck space compared to the Beneteau First 33.7 Deep draft 1996 at 32,8 feet (1996). Weight tells a clearer story for trailering families: the Beneteau First 456 1982 tips the scales at 26 455 lbs — 15 873 lbs less than the Beneteau First 33.7 Deep draft 1996 at 10 582 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 80 hp, the Beneteau First 456 1982 has a 52-hp advantage over the Beneteau First 33.7 Deep draft 1996's 28-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Beneteau First 456 1982 carries 53 gallons versus 12 gallons in the Beneteau First 33.7 Deep draft 1996. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
For family outings this is probably the sharpest distinction between the two. The Beneteau First 456 1982 is rated for 14 passengers, while the Beneteau First 33.7 Deep draft 1996 caps at 10. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau First 456 1982 could be the deciding factor.
Displacement is where these two sailboats genuinely part ways. The Beneteau First 456 1982 displaces 26 455 lbs — a 15 873-lb difference over the Beneteau First 33.7 Deep draft 1996 at 10 582 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.
Both boats draw a similar depth — 6,1 ft and 7,1 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.
The Beneteau First 33.7 Deep draft 1996 uses Sloop rigging. Helm style differs too: the Beneteau First 33.7 Deep draft 1996 uses a 1 tiller versus a 1 wheel on the Beneteau First 456 1982. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. For auxiliary power the Beneteau First 456 1982 carries a 80-hp engine against 28 hp on the Beneteau First 33.7 Deep draft 1996. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.
Hull speed is rated at 8,4 knots for the Beneteau First 456 1982 and 7,2 knots for the Beneteau First 33.7 Deep draft 1996. For extended cruising, water capacity matters: the Beneteau First 456 1982 carries 106 gallons versus 40 gallons on the Beneteau First 33.7 Deep draft 1996 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.
Bottom line: The Beneteau First 456 1982 is the offshore and bluewater choice — at 26 455 lbs displacement and 47 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau First 33.7 Deep draft 1996 at 10 582 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.