The Beneteau First 325 1984 vs Beneteau Oceanis 40 CC 1995 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis 40 CC 1995 measures 41,0 feet overall (1995), giving it roughly 6,9 additional feet of deck space compared to the Beneteau First 325 1984 at 34,1 feet (1984). Weight tells a clearer story for trailering families: the Beneteau Oceanis 40 CC 1995 tips the scales at 18 739 lbs — 9 039 lbs less than the Beneteau First 325 1984 at 9 700 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 50 hp, the Beneteau Oceanis 40 CC 1995 has a 22-hp advantage over the Beneteau First 325 1984's 28-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Beneteau Oceanis 40 CC 1995 carries 53 gallons versus 13 gallons in the Beneteau First 325 1984. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis 40 CC 1995 is rated for 12 passengers, while the Beneteau First 325 1984 caps at 10. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis 40 CC 1995 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis 40 CC 1995 displaces 18 739 lbs — a 9 039-lb difference over the Beneteau First 325 1984 at 9 700 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Both boats draw a similar depth — 6,1 ft and 5,7 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Beneteau First 325 1984 uses Sloop rigging. Helm style differs too: the Beneteau First 325 1984 uses a 1 tiller versus a 1 wheel on the Beneteau Oceanis 40 CC 1995. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. For auxiliary power the Beneteau Oceanis 40 CC 1995 carries a 50-hp engine against 28 hp on the Beneteau First 325 1984. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

Hull speed is rated at 8,1 knots for the Beneteau Oceanis 40 CC 1995 and 7,2 knots for the Beneteau First 325 1984. For extended cruising, water capacity matters: the Beneteau Oceanis 40 CC 1995 carries 132 gallons versus 53 gallons on the Beneteau First 325 1984 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.