The Beneteau First 29 Deep draft 1983 vs Beneteau Oceanis Clipper 393 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis Clipper 393 2008 measures 38,2 feet overall (2008), giving it roughly 8,6 additional feet of deck space compared to the Beneteau First 29 Deep draft 1983 at 29,6 feet (1983). Weight tells a clearer story for trailering families: the Beneteau Oceanis Clipper 393 2008 tips the scales at 17 152 lbs — 10 538 lbs less than the Beneteau First 29 Deep draft 1983 at 6 614 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 40 hp, the Beneteau Oceanis Clipper 393 2008 has a 31-hp advantage over the Beneteau First 29 Deep draft 1983's 9-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Beneteau Oceanis Clipper 393 2008 carries 36 gallons versus 7 gallons in the Beneteau First 29 Deep draft 1983. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis Clipper 393 2008 is rated for 11 passengers, while the Beneteau First 29 Deep draft 1983 caps at 9. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis Clipper 393 2008 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis Clipper 393 2008 displaces 17 152 lbs — a 10 538-lb difference over the Beneteau First 29 Deep draft 1983 at 6 614 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Both boats draw a similar depth — 5,6 ft and 5,1 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Beneteau First 29 Deep draft 1983 uses Sloop rigging. For auxiliary power the Beneteau Oceanis Clipper 393 2008 carries a 40-hp engine against 9 hp on the Beneteau First 29 Deep draft 1983. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

For extended cruising, water capacity matters: the Beneteau Oceanis Clipper 393 2008 carries 119 gallons versus 24 gallons on the Beneteau First 29 Deep draft 1983 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.