The Beneteau First 29 Deep draft 1983 vs Beneteau First 30 JK 2010 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.
On paper these two are close siblings in the size department — Beneteau First 29 Deep draft 1983 at 29,6 ft versus Beneteau First 30 JK 2010 at 32,2 ft. Weight tells a clearer story for trailering families: the Beneteau First 30 JK 2010 tips the scales at 8 267 lbs — 1 653 lbs less than the Beneteau First 29 Deep draft 1983 at 6 614 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
Both boats share a closely matched power ceiling — 9 hp for the Beneteau First 29 Deep draft 1983 and 20 hp for the Beneteau First 30 JK 2010. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Both carry nearly identical fuel loads — 7 gal and 8 gal — so range won't be a tiebreaker here.
Both boats are rated for 9 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
Both boats sit in a similar displacement bracket — 6 614 lbs for the Beneteau First 29 Deep draft 1983 and 8 267 lbs for the Beneteau First 30 JK 2010. Comparable displacement means broadly similar seakeeping behaviour and load capacity, though hull form and ballast ratio will still produce noticeably different sailing characteristics.
Both boats draw a similar depth — 5,6 ft and 6,2 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.
The Beneteau First 29 Deep draft 1983 uses Sloop rigging. Helm style differs too: the Beneteau First 29 Deep draft 1983 uses a 1 tiller versus a 1 tiller (helm wheel in option) on the Beneteau First 30 JK 2010. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. For auxiliary power the Beneteau First 30 JK 2010 carries a 20-hp engine against 9 hp on the Beneteau First 29 Deep draft 1983. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.
Hull speed is rated at 7,0 knots for the Beneteau First 30 JK 2010 and 6,7 knots for the Beneteau First 29 Deep draft 1983. For extended cruising, water capacity matters: the Beneteau First 30 JK 2010 carries 42 gallons versus 24 gallons on the Beneteau First 29 Deep draft 1983 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.
Bottom line: The Beneteau First 30 JK 2010 at 32,2 ft offers more living space, greater range, and a more substantial offshore capability. The Beneteau First 29 Deep draft 1983 at 29,6 ft is the easier, lower-cost option — simpler to crew and a strong choice for coastal and day sailing.