The Beneteau First 28 1980 vs Beneteau Oceanis 300 Shoal draft 1991 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — Beneteau First 28 1980 at 28,1 ft versus Beneteau Oceanis 300 Shoal draft 1991 at 31,1 ft. Weight tells a clearer story for trailering families: the Beneteau Oceanis 300 Shoal draft 1991 tips the scales at 7 055 lbs — 4 850 lbs less than the Beneteau First 28 1980 at 2 205 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 15 hp for the Beneteau First 28 1980 and 24 hp for the Beneteau Oceanis 300 Shoal draft 1991. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the Beneteau Oceanis 300 Shoal draft 1991 carries 17 gallons versus 7 gallons in the Beneteau First 28 1980. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis 300 Shoal draft 1991 is rated for 9 passengers, while the Beneteau First 28 1980 caps at 8. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis 300 Shoal draft 1991 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis 300 Shoal draft 1991 displaces 7 055 lbs — a 4 850-lb difference over the Beneteau First 28 1980 at 2 205 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau First 28 1980 draws 5,7 ft, compared to 4,5 ft for the Beneteau Oceanis 300 Shoal draft 1991. That 1,2-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Beneteau First 28 1980 uses Sloop rigging. For auxiliary power the Beneteau Oceanis 300 Shoal draft 1991 carries a 24-hp engine against 15 hp on the Beneteau First 28 1980. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

Hull speed is rated at 7,2 knots for the Beneteau Oceanis 300 Shoal draft 1991 and 6,6 knots for the Beneteau First 28 1980. For extended cruising, water capacity matters: the Beneteau Oceanis 300 Shoal draft 1991 carries 45 gallons versus 24 gallons on the Beneteau First 28 1980 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.