Beneteau First 27 SE 2011 boat specs
Beneteau
Beneteau First 27 SE 2011
2011
View full specs →
VS
Beneteau Oceanis 51.1 2020 boat specs
Beneteau
Beneteau Oceanis 51.1 2020
2020
View full specs →

Beneteau First 27 SE 2011 vs Beneteau Oceanis 51.1 2020 — Same Brand, Different Boat

The Beneteau First 27 SE 2011 vs Beneteau Oceanis 51.1 2020 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis 51.1 2020 measures 52,4 feet overall (2020), giving it roughly 26,1 additional feet of deck space compared to the Beneteau First 27 SE 2011 at 26,3 feet (2011). Weight tells a clearer story for trailering families: the Beneteau Oceanis 51.1 2020 tips the scales at 30 702 lbs — 27 285 lbs less than the Beneteau First 27 SE 2011 at 3 417 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 110 hp, the Beneteau Oceanis 51.1 2020 has a 100-hp advantage over the Beneteau First 27 SE 2011's 10-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis 51.1 2020 is rated for 15 passengers, while the Beneteau First 27 SE 2011 caps at 8. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis 51.1 2020 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis 51.1 2020 displaces 30 702 lbs — a 27 285-lb difference over the Beneteau First 27 SE 2011 at 3 417 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau Oceanis 51.1 2020 draws 9,5 ft, compared to 3,1 ft for the Beneteau First 27 SE 2011. That 6,4-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

For auxiliary power the Beneteau Oceanis 51.1 2020 carries a 110-hp engine against 10 hp on the Beneteau First 27 SE 2011. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

Bottom line: The Beneteau Oceanis 51.1 2020 is the offshore and bluewater choice — at 30 702 lbs displacement and 52 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau First 27 SE 2011 at 3 417 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.
Measurements / Dimensions
Length overall - Detail26.30 ft
Length overall - Detail52.40 ft
Length - Feet26.3
Length - Feet52.4
Length overall - Meters8.02
Length overall - Meters15.97
Length overall - Inches316
Length overall - Inches629
Beam8.40 ft
Beam15.90 ft
Beam - Meters2.56
Beam - Meters4.85
Beam - Inches101
Beam - Inches191
Draft [max] - Detail3.10 ft
Draft [max] - Detail9.50 ft
Draft [max] - Meters0.94
Draft [max] - Meters2.9
Draft [max] - Inches37
Draft [max] - Inches114
Displacement3417.00 lbs
Displacement30702.00 lbs
Draft Minnot available
Draft Min6.40 ft
Engine and Drivetrain
Horsepower10 hp
Horsepower110 hp
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal53
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters200.63
Fuel typenot available
Fuel typeDiesel
Drive typenot available
Drive typeinboard
Operational Info
Sleeping capacity2
Sleeping capacity7
Cabins1
Cabins3
Head1
Head2
Boat typeSail
Boat typeSail
Water capacitynot available
Water capacity116
Holding tank capacity - Galnot available
Holding tank capacity - Gal42.3
Holding tank capacity - Litersnot available
Holding tank capacity - Liters160.12
Riggingnot available
RiggingSloop
Mast Configurationnot available
Mast ConfigurationDeck stepped mast
Body / Hull
Ruddernot available
Rudder2 spade rudders
Helmnot available
Helm2 wheels
Performance
Maximum speednot available
Maximum speed9.25
Maximum speed measurenot available
Maximum speed measureknots

Beneteau First 27 SE 2011 vs Beneteau Oceanis 51.1 2020 — Common Questions

Which is the larger boat — the Beneteau First 27 SE 2011 or the Beneteau Oceanis 51.1 2020?
The Beneteau Oceanis 51.1 2020 is the longer of the two at 52,4 feet overall. The Beneteau First 27 SE 2011 comes in at 26,3 feet, making it roughly 26,1 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Beneteau First 27 SE 2011 or the Beneteau Oceanis 51.1 2020?
For trailering, the Beneteau First 27 SE 2011 has the edge at 3 417 lbs dry weight versus 30 702 lbs for the Beneteau Oceanis 51.1 2020. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Beneteau Oceanis 51.1 2020 is rated to a maximum of 110 hp, giving it the larger power ceiling. The Beneteau First 27 SE 2011 tops out at 10 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Beneteau First 27 SE 2011 is Coast Guard rated for 8 passengers, while the Beneteau Oceanis 51.1 2020 is certified for 15. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the deeper draft — the Beneteau First 27 SE 2011 or the Beneteau Oceanis 51.1 2020?
The Beneteau Oceanis 51.1 2020 has the deeper draft at 9,5 ft, versus 3,1 ft for the Beneteau First 27 SE 2011. A deeper draft generally means better upwind performance and stability, but limits access to shallow anchorages and some marina berths. Always check the controlling depth of your home port and favourite cruising grounds before committing.
Is the Beneteau First 27 SE 2011 or the Beneteau Oceanis 51.1 2020 better suited for offshore sailing?
For offshore work, displacement and construction are the primary indicators. The Beneteau Oceanis 51.1 2020 at 30 702 lbs displacement is the heavier, more load-carrying design — generally better suited to extended passages where seakeeping and provisioning capacity matter most. The Beneteau First 27 SE 2011 at 3 417 lbs will typically be livelier and more responsive in lighter conditions.
Which boat is wider, and does it affect trailering?
The Beneteau Oceanis 51.1 2020 measures 191" wide, compared to 101" for the Beneteau First 27 SE 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Beneteau First 27 SE 2011 and Beneteau Oceanis 51.1 2020 from the same manufacturer?
Yes — both the Beneteau First 27 SE 2011 and the Beneteau Oceanis 51.1 2020 are built by Beneteau. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.