Beneteau First 27 SE 2011 boat specs
Beneteau
Beneteau First 27 SE 2011
2011
View full specs →
VS
Beneteau First Class 10 1987 boat specs
Beneteau
Beneteau First Class 10 1987
1987
View full specs →

Beneteau First 27 SE 2011 vs Beneteau First Class 10 1987 — Same Brand, Different Boat

The Beneteau First 27 SE 2011 vs Beneteau First Class 10 1987 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau First Class 10 1987 measures 34,3 feet overall (1987), giving it roughly 8,0 additional feet of deck space compared to the Beneteau First 27 SE 2011 at 26,3 feet (2011). Weight tells a clearer story for trailering families: the Beneteau First Class 10 1987 tips the scales at 6 900 lbs — 3 483 lbs less than the Beneteau First 27 SE 2011 at 3 417 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Beneteau First 27 SE 2011 carries a rated maximum of 10 hp. Engine data for the Beneteau First Class 10 1987 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.

For family outings this is probably the sharpest distinction between the two. The Beneteau First Class 10 1987 is rated for 10 passengers, while the Beneteau First 27 SE 2011 caps at 8. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau First Class 10 1987 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau First Class 10 1987 displaces 6 900 lbs — a 3 483-lb difference over the Beneteau First 27 SE 2011 at 3 417 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau First Class 10 1987 draws 5,8 ft, compared to 3,1 ft for the Beneteau First 27 SE 2011. That 2,7-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Beneteau First 27 SE 2011 has a documented auxiliary engine of 10 hp.

Bottom line: The Beneteau First Class 10 1987 is the offshore and bluewater choice — at 6 900 lbs displacement and 34 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau First 27 SE 2011 at 3 417 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.
Measurements / Dimensions
Length overall - Detail26.30 ft
Length overall - Detail34.33 ft
Length - Feet26.3
Length - Feet34.33
Length overall - Meters8.02
Length overall - Meters10.46
Length overall - Inches316
Length overall - Inches412
Beam8.40 ft
Beam9.67 ft
Beam - Meters2.56
Beam - Meters2.95
Beam - Inches101
Beam - Inches116
Draft [max] - Detail3.10 ft
Draft [max] - Detail5.75 ft
Draft [max] - Meters0.94
Draft [max] - Meters1.75
Draft [max] - Inches37
Draft [max] - Inches69
Displacement3417.00 lbs
Displacement6900.00 lbs
Engine and Drivetrain
Horsepower10 hp
Horsepowernot available
Operational Info
Sleeping capacity2
Sleeping capacitynot available
Cabins1
Cabinsnot available
Head1
Headnot available
Boat typeSail
Boat typeSail
Riggingnot available
RiggingFractional Sloop

Beneteau First 27 SE 2011 vs Beneteau First Class 10 1987 — Common Questions

Which is the larger boat — the Beneteau First 27 SE 2011 or the Beneteau First Class 10 1987?
The Beneteau First Class 10 1987 is the longer of the two at 34,3 feet overall. The Beneteau First 27 SE 2011 comes in at 26,3 feet, making it roughly 8,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Beneteau First 27 SE 2011 or the Beneteau First Class 10 1987?
For trailering, the Beneteau First 27 SE 2011 has the edge at 3 417 lbs dry weight versus 6 900 lbs for the Beneteau First Class 10 1987. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Beneteau First 27 SE 2011 has a documented max rating of 10 hp. Engine specifications for the Beneteau First Class 10 1987 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Beneteau First 27 SE 2011 is Coast Guard rated for 8 passengers, while the Beneteau First Class 10 1987 is certified for 10. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the deeper draft — the Beneteau First 27 SE 2011 or the Beneteau First Class 10 1987?
The Beneteau First Class 10 1987 has the deeper draft at 5,8 ft, versus 3,1 ft for the Beneteau First 27 SE 2011. A deeper draft generally means better upwind performance and stability, but limits access to shallow anchorages and some marina berths. Always check the controlling depth of your home port and favourite cruising grounds before committing.
Is the Beneteau First 27 SE 2011 or the Beneteau First Class 10 1987 better suited for offshore sailing?
For offshore work, displacement and construction are the primary indicators. The Beneteau First Class 10 1987 at 6 900 lbs displacement is the heavier, more load-carrying design — generally better suited to extended passages where seakeeping and provisioning capacity matter most. The Beneteau First 27 SE 2011 at 3 417 lbs will typically be livelier and more responsive in lighter conditions.
Which boat is wider, and does it affect trailering?
The Beneteau First Class 10 1987 measures 116" wide, compared to 101" for the Beneteau First 27 SE 2011. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Beneteau First 27 SE 2011 and Beneteau First Class 10 1987 from the same manufacturer?
Yes — both the Beneteau First 27 SE 2011 and the Beneteau First Class 10 1987 are built by Beneteau. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.