The Beneteau First 24 SE 0 vs Beneteau Oceanis Clipper 423 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.
Size is the most obvious dividing line here. The Beneteau Oceanis Clipper 423 2008 measures 43,1 feet overall (2008), giving it roughly 20,0 additional feet of deck space compared to the Beneteau First 24 SE 0 at 23,1 feet. Weight tells a clearer story for trailering families: the Beneteau Oceanis Clipper 423 2008 tips the scales at 19 500 lbs - 17 472 lbs less than the Beneteau First 24 SE 0 at 2 028 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The Beneteau Oceanis Clipper 423 2008 tops out at 80 hp. Engine specs for the Beneteau First 24 SE 0 aren't listed - confirm with a dealer before selecting an outboard.
For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis Clipper 423 2008 is rated for 13 passengers, while the Beneteau First 24 SE 0 caps at 7. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis Clipper 423 2008 could be the deciding factor.
Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis Clipper 423 2008 displaces 19 500 lbs - a 17 472-lb difference over the Beneteau First 24 SE 0 at 2 028 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.
Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau First 24 SE 0 draws 10,0 ft, compared to 5,6 ft for the Beneteau Oceanis Clipper 423 2008. That 4,4-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.
The Beneteau Oceanis Clipper 423 2008 has a documented auxiliary engine of 80 hp.
Bottom line: The Beneteau Oceanis Clipper 423 2008 is the offshore and bluewater choice - at 19 500 lbs displacement and 43 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau First 24 SE 0 at 2 028 lbs is the more nimble, accessible option - easier to single-hand and better suited to coastal and inland sailing.