Beneteau First 24 SE 0 boat specs
Beneteau
Beneteau First 24 SE 0
View full specs →
VS
Beneteau First 30E 1981 boat specs
Beneteau
Beneteau First 30E 1981
1981
View full specs →

Beneteau First 24 SE 0 vs Beneteau First 30E 1981 — Same Brand, Different Boat

The Beneteau First 24 SE 0 vs Beneteau First 30E 1981 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau First 30E 1981 measures 31,1 feet overall (1981), giving it roughly 8,0 additional feet of deck space compared to the Beneteau First 24 SE 0 at 23,1 feet. Weight tells a clearer story for trailering families: the Beneteau First 30E 1981 tips the scales at 8 929 lbs — 6 901 lbs less than the Beneteau First 24 SE 0 at 2 028 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Beneteau First 30E 1981 tops out at 15 hp. Engine specs for the Beneteau First 24 SE 0 aren't listed — confirm with a dealer before selecting an outboard.

For family outings this is probably the sharpest distinction between the two. The Beneteau First 30E 1981 is rated for 9 passengers, while the Beneteau First 24 SE 0 caps at 7. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau First 30E 1981 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau First 30E 1981 displaces 8 929 lbs — a 6 901-lb difference over the Beneteau First 24 SE 0 at 2 028 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau First 24 SE 0 draws 10,0 ft, compared to 5,1 ft for the Beneteau First 30E 1981. That 4,9-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Beneteau First 30E 1981 has a documented auxiliary engine of 15 hp.

Bottom line: The Beneteau First 30E 1981 is the offshore and bluewater choice — at 8 929 lbs displacement and 31 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau First 24 SE 0 at 2 028 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.
Measurements / Dimensions
Length overall - Detail23.11 ft
Length overall - Detail31.10 ft
Length - Feet23.11
Length - Feet31.1
Length overall - Meters7.04
Length overall - Meters9.48
Length overall - Inches277
Length overall - Inches373
Beam8.20 ft
Beam10.70 ft
Beam - Meters2.5
Beam - Meters3.26
Beam - Inches98
Beam - Inches128
Draft [max] - Detail10.00 ft
Draft [max] - Detail5.10 ft
Draft [max] - Meters3.05
Draft [max] - Meters1.55
Draft [max] - Inches120
Draft [max] - Inches61
Draft Min6.70 ft
Draft Minnot available
Displacement2028.00 lbs
Displacement8929.00 lbs
Operational Info
Sleeping capacity4
Sleeping capacity6
Cabins1
Cabins2
Boat typeSail
Boat typeSail
Headnot available
Head1
Water capacitynot available
Water capacity26.4
Riggingnot available
RiggingSloop
Mast Configurationnot available
Mast ConfigurationDeck stepped mast
Body / Hull
Ruddernot available
Rudder1 spade rudder
Helmnot available
Helm1 tiller
Engine and Drivetrain
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal7.9
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters29.9
Horsepowernot available
Horsepower15 hp
Fuel typenot available
Fuel typeDiesel
Drive typenot available
Drive typeinboard
Performance
Maximum speednot available
Maximum speed6.74
Maximum speed measurenot available
Maximum speed measureknots

Beneteau First 24 SE 0 vs Beneteau First 30E 1981 — Common Questions

Which is the larger boat — the Beneteau First 24 SE 0 or the Beneteau First 30E 1981?
The Beneteau First 30E 1981 is the longer of the two at 31,1 feet overall. The Beneteau First 24 SE 0 comes in at 23,1 feet, making it roughly 8,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Beneteau First 24 SE 0 or the Beneteau First 30E 1981?
For trailering, the Beneteau First 24 SE 0 has the edge at 2 028 lbs dry weight versus 8 929 lbs for the Beneteau First 30E 1981. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Beneteau First 30E 1981 has a documented max rating of 15 hp. Engine specifications for the Beneteau First 24 SE 0 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Beneteau First 24 SE 0 is Coast Guard rated for 7 passengers, while the Beneteau First 30E 1981 is certified for 9. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the deeper draft — the Beneteau First 24 SE 0 or the Beneteau First 30E 1981?
The Beneteau First 24 SE 0 has the deeper draft at 10,0 ft, versus 5,1 ft for the Beneteau First 30E 1981. A deeper draft generally means better upwind performance and stability, but limits access to shallow anchorages and some marina berths. Always check the controlling depth of your home port and favourite cruising grounds before committing.
Is the Beneteau First 24 SE 0 or the Beneteau First 30E 1981 better suited for offshore sailing?
For offshore work, displacement and construction are the primary indicators. The Beneteau First 30E 1981 at 8 929 lbs displacement is the heavier, more load-carrying design — generally better suited to extended passages where seakeeping and provisioning capacity matter most. The Beneteau First 24 SE 0 at 2 028 lbs will typically be livelier and more responsive in lighter conditions.
Which boat is wider, and does it affect trailering?
The Beneteau First 30E 1981 measures 128" wide, compared to 98" for the Beneteau First 24 SE 0. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Beneteau First 24 SE 0 and Beneteau First 30E 1981 from the same manufacturer?
Yes — both the Beneteau First 24 SE 0 and the Beneteau First 30E 1981 are built by Beneteau. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.