The Beneteau First 235 Fin keel 1986 vs Beneteau Oceanis Clipper 373 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis Clipper 373 2008 measures 36,9 feet overall (2008), giving it roughly 13,4 additional feet of deck space compared to the Beneteau First 235 Fin keel 1986 at 23,5 feet (1986). Weight tells a clearer story for trailering families: the Beneteau Oceanis Clipper 373 2008 tips the scales at 14 617 lbs — 10 583 lbs less than the Beneteau First 235 Fin keel 1986 at 4 034 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 40 hp, the Beneteau Oceanis Clipper 373 2008 has a 30-hp advantage over the Beneteau First 235 Fin keel 1986's 10-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis Clipper 373 2008 is rated for 11 passengers, while the Beneteau First 235 Fin keel 1986 caps at 7. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis Clipper 373 2008 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis Clipper 373 2008 displaces 14 617 lbs — a 10 583-lb difference over the Beneteau First 235 Fin keel 1986 at 4 034 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau Oceanis Clipper 373 2008 draws 6,1 ft, compared to 3,1 ft for the Beneteau First 235 Fin keel 1986. That 3,0-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Beneteau First 235 Fin keel 1986 uses Sloop rigging. For auxiliary power the Beneteau Oceanis Clipper 373 2008 carries a 40-hp engine against 10 hp on the Beneteau First 235 Fin keel 1986. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

For extended cruising, water capacity matters: the Beneteau Oceanis Clipper 373 2008 carries 99 gallons versus 13 gallons on the Beneteau First 235 Fin keel 1986 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.