Beneteau First 20 2013 boat specs
Beneteau
Beneteau First 20 2013
2013
View full specs →
VS
Beneteau Oceanis Clipper 411 2008 boat specs
Beneteau
Beneteau Oceanis Clipper 411 2008
2008
View full specs →

Beneteau First 20 2013 vs Beneteau Oceanis Clipper 411 2008 — Same Brand, Different Boat

The Beneteau First 20 2013 vs Beneteau Oceanis Clipper 411 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis Clipper 411 2008 measures 41,0 feet overall (2008), giving it roughly 20,0 additional feet of deck space compared to the Beneteau First 20 2013 at 21,0 feet (2013). Weight tells a clearer story for trailering families: the Beneteau Oceanis Clipper 411 2008 tips the scales at 17 196 lbs — 14 451 lbs less than the Beneteau First 20 2013 at 2 745 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Beneteau First 20 2013 carries a rated maximum of 10 hp. Engine data for the Beneteau Oceanis Clipper 411 2008 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis Clipper 411 2008 is rated for 12 passengers, while the Beneteau First 20 2013 caps at 6. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis Clipper 411 2008 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis Clipper 411 2008 displaces 17 196 lbs — a 14 451-lb difference over the Beneteau First 20 2013 at 2 745 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Both boats draw a similar depth — 5,1 ft and 4,8 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Beneteau First 20 2013 has a documented auxiliary engine of 10 hp.

The Beneteau First 20 2013 is trailerable, giving it a significant lifestyle advantage for sailors who want to move between lakes, rivers, and coastal waters without committing to a marina slip.

Bottom line: The Beneteau Oceanis Clipper 411 2008 is the offshore and bluewater choice — at 17 196 lbs displacement and 41 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau First 20 2013 at 2 745 lbs is the more nimble, accessible option and is trailerable — easier to single-hand and better suited to coastal and inland sailing.
Measurements / Dimensions
Length overall - Detail21.00 ft
Length overall - Detail41.00 ft
Length - Feet21
Length - Feet41
Length overall - Meters6.4
Length overall - Meters12.5
Length overall - Inches252
Length overall - Inches492
Beam8.10 ft
Beam13.00 ft
Beam - Meters2.47
Beam - Meters3.96
Beam - Inches97
Beam - Inches156
Draft [max] - Detail5.11 ft
Draft [max] - Detail4.75 ft
Draft [max] - Meters1.56
Draft [max] - Meters1.45
Draft [max] - Inches61
Draft [max] - Inches57
Displacement2745.00 lbs
Displacement17196.00 lbs
Body / Hull
Rudder2 transom hung rudders
Ruddernot available
Helm1 tiller
Helmnot available
Engine and Drivetrain
Horsepower10 hp
Horsepowernot available
Drive typeoutboard
Drive typenot available
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal45
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters170.34
Engine makenot available
Engine makeYanmar
Fuel typenot available
Fuel typeDiesel
Performance
Maximum speed5.95
Maximum speednot available
Maximum speed measureknots
Maximum speed measurenot available
Operational Info
Sleeping capacity2
Sleeping capacity6
TrailerableYes
Trailerablenot available
Mast ConfigurationDeck stepped mast
Mast Configurationnot available
Boat typeSail
Boat typeSail
Cabinsnot available
Cabins3
Headnot available
Head2
Water capacitynot available
Water capacity151

Beneteau First 20 2013 vs Beneteau Oceanis Clipper 411 2008 — Common Questions

Which is the larger boat — the Beneteau First 20 2013 or the Beneteau Oceanis Clipper 411 2008?
The Beneteau Oceanis Clipper 411 2008 is the longer of the two at 41,0 feet overall. The Beneteau First 20 2013 comes in at 21,0 feet, making it roughly 20,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Beneteau First 20 2013 or the Beneteau Oceanis Clipper 411 2008?
For trailering, the Beneteau First 20 2013 has the edge at 2 745 lbs dry weight versus 17 196 lbs for the Beneteau Oceanis Clipper 411 2008. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Beneteau First 20 2013 has a documented max rating of 10 hp. Engine specifications for the Beneteau Oceanis Clipper 411 2008 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Beneteau First 20 2013 is Coast Guard rated for 6 passengers, while the Beneteau Oceanis Clipper 411 2008 is certified for 12. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the deeper draft — the Beneteau First 20 2013 or the Beneteau Oceanis Clipper 411 2008?
The Beneteau First 20 2013 has the deeper draft at 5,1 ft, versus 4,8 ft for the Beneteau Oceanis Clipper 411 2008. A deeper draft generally means better upwind performance and stability, but limits access to shallow anchorages and some marina berths. Always check the controlling depth of your home port and favourite cruising grounds before committing.
Is the Beneteau First 20 2013 or the Beneteau Oceanis Clipper 411 2008 better suited for offshore sailing?
For offshore work, displacement and construction are the primary indicators. The Beneteau Oceanis Clipper 411 2008 at 17 196 lbs displacement is the heavier, more load-carrying design — generally better suited to extended passages where seakeeping and provisioning capacity matter most. The Beneteau First 20 2013 at 2 745 lbs will typically be livelier and more responsive in lighter conditions.
Can the Beneteau First 20 2013 be trailered?
The Beneteau First 20 2013 is listed as trailerable, giving owners the flexibility to launch from any suitable ramp and avoid permanent berthing costs. The Beneteau Oceanis Clipper 411 2008 is not listed as trailerable — it will need a marina berth or mooring.
Which boat is wider, and does it affect trailering?
The Beneteau Oceanis Clipper 411 2008 measures 156" wide, compared to 97" for the Beneteau First 20 2013. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Beneteau First 20 2013 and Beneteau Oceanis Clipper 411 2008 from the same manufacturer?
Yes — both the Beneteau First 20 2013 and the Beneteau Oceanis Clipper 411 2008 are built by Beneteau. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.