The Beneteau Figaro 3 2019 vs Beneteau Oceanis Clipper 393 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department - Beneteau Figaro 3 2019 at 36,0 ft versus Beneteau Oceanis Clipper 393 2008 at 38,2 ft. Weight tells a clearer story for trailering families: the Beneteau Oceanis Clipper 393 2008 tips the scales at 17 152 lbs - 10 152 lbs less than the Beneteau Figaro 3 2019 at 7 000 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 24 hp for the Beneteau Figaro 3 2019 and 40 hp for the Beneteau Oceanis Clipper 393 2008. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the Beneteau Oceanis Clipper 393 2008 carries 36 gallons versus 11 gallons in the Beneteau Figaro 3 2019. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis Clipper 393 2008 is rated for 11 passengers, while the Beneteau Figaro 3 2019 caps at 10. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis Clipper 393 2008 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis Clipper 393 2008 displaces 17 152 lbs - a 10 152-lb difference over the Beneteau Figaro 3 2019 at 7 000 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau Figaro 3 2019 draws 8,2 ft, compared to 5,1 ft for the Beneteau Oceanis Clipper 393 2008. That 3,1-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Beneteau Figaro 3 2019 uses Sloop rigging. For auxiliary power the Beneteau Oceanis Clipper 393 2008 carries a 40-hp engine against 24 hp on the Beneteau Figaro 3 2019. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.