The Beneteau Evasion 37 1979 vs Beneteau Oceanis Clipper 393 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — Beneteau Evasion 37 1979 at 37,2 ft versus Beneteau Oceanis Clipper 393 2008 at 38,2 ft. Weight tells a clearer story for trailering families: the Beneteau Evasion 37 1979 tips the scales at 17 637 lbs — 485 lbs more than the Beneteau Oceanis Clipper 393 2008 at 17 152 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 60 hp for the Beneteau Evasion 37 1979 and 40 hp for the Beneteau Oceanis Clipper 393 2008. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the Beneteau Evasion 37 1979 carries 66 gallons versus 36 gallons in the Beneteau Oceanis Clipper 393 2008. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

Both boats are rated for 11 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Both boats sit in a similar displacement bracket — 17 637 lbs for the Beneteau Evasion 37 1979 and 17 152 lbs for the Beneteau Oceanis Clipper 393 2008. Comparable displacement means broadly similar seakeeping behaviour and load capacity, though hull form and ballast ratio will still produce noticeably different sailing characteristics.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau Evasion 37 1979 draws 7,6 ft, compared to 5,1 ft for the Beneteau Oceanis Clipper 393 2008. That 2,5-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Beneteau Evasion 37 1979 uses Masthead-sloop rigging. For auxiliary power the Beneteau Evasion 37 1979 carries a 60-hp engine against 40 hp on the Beneteau Oceanis Clipper 393 2008. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

For extended cruising, water capacity matters: the Beneteau Evasion 37 1979 carries 132 gallons versus 119 gallons on the Beneteau Oceanis Clipper 393 2008 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.