The Beneteau Evasion 34 Fin keel 1980 vs Beneteau Oceanis Clipper 423 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis Clipper 423 2008 measures 43,1 feet overall (2008), giving it roughly 8,0 additional feet of deck space compared to the Beneteau Evasion 34 Fin keel 1980 at 35,1 feet (1980). Weight tells a clearer story for trailering families: the Beneteau Oceanis Clipper 423 2008 tips the scales at 19 500 lbs — 7 375 lbs less than the Beneteau Evasion 34 Fin keel 1980 at 12 125 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 80 hp, the Beneteau Oceanis Clipper 423 2008 has a 30-hp advantage over the Beneteau Evasion 34 Fin keel 1980's 50-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Both carry nearly identical fuel loads — 53 gal and 53 gal — so range won't be a tiebreaker here.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis Clipper 423 2008 is rated for 13 passengers, while the Beneteau Evasion 34 Fin keel 1980 caps at 10. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis Clipper 423 2008 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis Clipper 423 2008 displaces 19 500 lbs — a 7 375-lb difference over the Beneteau Evasion 34 Fin keel 1980 at 12 125 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Both boats draw a similar depth — 5,1 ft and 5,6 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Beneteau Evasion 34 Fin keel 1980 is rigged as a Sloop while the Beneteau Oceanis Clipper 423 2008 carries Masthead-sloop rigging — a meaningful difference in sail handling complexity, upwind performance, and the size of crew you'll need to work the boat comfortably. For auxiliary power the Beneteau Oceanis Clipper 423 2008 carries a 80-hp engine against 50 hp on the Beneteau Evasion 34 Fin keel 1980. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

For extended cruising, water capacity matters: the Beneteau Oceanis Clipper 423 2008 carries 154 gallons versus 79 gallons on the Beneteau Evasion 34 Fin keel 1980 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.