The Beneteau Evasion 34 Fin keel 1980 vs Beneteau First 38S5 1989 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau First 38S5 1989 measures 38,5 feet overall (1989), giving it roughly 3,4 additional feet of deck space compared to the Beneteau Evasion 34 Fin keel 1980 at 35,1 feet (1980). Weight tells a clearer story for trailering families: the Beneteau First 38S5 1989 tips the scales at 14 551 lbs — 2 426 lbs less than the Beneteau Evasion 34 Fin keel 1980 at 12 125 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 50 hp for the Beneteau Evasion 34 Fin keel 1980 and 43 hp for the Beneteau First 38S5 1989. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the Beneteau Evasion 34 Fin keel 1980 carries 53 gallons versus 32 gallons in the Beneteau First 38S5 1989. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Beneteau First 38S5 1989 is rated for 11 passengers, while the Beneteau Evasion 34 Fin keel 1980 caps at 10. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau First 38S5 1989 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau First 38S5 1989 displaces 14 551 lbs — a 2 426-lb difference over the Beneteau Evasion 34 Fin keel 1980 at 12 125 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau First 38S5 1989 draws 6,2 ft, compared to 5,1 ft for the Beneteau Evasion 34 Fin keel 1980. That 1,1-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Beneteau Evasion 34 Fin keel 1980 uses Sloop rigging. Helm style differs too: the Beneteau Evasion 34 Fin keel 1980 uses a 2 wheels versus a 1 wheel on the Beneteau First 38S5 1989. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. For auxiliary power the Beneteau Evasion 34 Fin keel 1980 carries a 50-hp engine against 43 hp on the Beneteau First 38S5 1989. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

Hull speed is rated at 7,4 knots for the Beneteau First 38S5 1989 and 7,2 knots for the Beneteau Evasion 34 Fin keel 1980. For extended cruising, water capacity matters: the Beneteau First 38S5 1989 carries 98 gallons versus 79 gallons on the Beneteau Evasion 34 Fin keel 1980 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.