The Beneteau Cyclades 43.3 2010 vs Beneteau Oceanis 62 2017 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis 62 2017 measures 62,1 feet overall (2017), giving it roughly 18,6 additional feet of deck space compared to the Beneteau Cyclades 43.3 2010 at 43,5 feet (2010). Weight tells a clearer story for trailering families: the Beneteau Oceanis 62 2017 tips the scales at 57 542 lbs — 37 745 lbs less than the Beneteau Cyclades 43.3 2010 at 19 797 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 170 hp, the Beneteau Oceanis 62 2017 has a 116-hp advantage over the Beneteau Cyclades 43.3 2010's 54-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Beneteau Oceanis 62 2017 carries 264 gallons versus 53 gallons in the Beneteau Cyclades 43.3 2010. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis 62 2017 is rated for 18 passengers, while the Beneteau Cyclades 43.3 2010 caps at 13. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis 62 2017 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis 62 2017 displaces 57 542 lbs — a 37 745-lb difference over the Beneteau Cyclades 43.3 2010 at 19 797 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau Oceanis 62 2017 draws 9,9 ft, compared to 6,2 ft for the Beneteau Cyclades 43.3 2010. That 3,7-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Beneteau Cyclades 43.3 2010 uses Fractional Sloop rigging. For auxiliary power the Beneteau Oceanis 62 2017 carries a 170-hp engine against 54 hp on the Beneteau Cyclades 43.3 2010. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.

For extended cruising, water capacity matters: the Beneteau Oceanis 62 2017 carries 28 gallons versus 14 gallons on the Beneteau Cyclades 43.3 2010 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.