Beneteau Cyclades 43.3 2010 boat specs
Beneteau
Beneteau Cyclades 43.3 2010
2010
View full specs →
VS
Beneteau Oceanis 43 2010 boat specs
Beneteau
Beneteau Oceanis 43 2010
2010
View full specs →

Beneteau Cyclades 43.3 2010 vs Beneteau Oceanis 43 2010 — Same Brand, Different Boat

The Beneteau Cyclades 43.3 2010 vs Beneteau Oceanis 43 2010 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — Beneteau Cyclades 43.3 2010 at 43,5 ft versus Beneteau Oceanis 43 2010 at 42,1 ft. Weight tells a clearer story for trailering families: the Beneteau Cyclades 43.3 2010 tips the scales at 19 797 lbs — 236 lbs more than the Beneteau Oceanis 43 2010 at 19 561 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 54 hp for the Beneteau Cyclades 43.3 2010 and 54 hp for the Beneteau Oceanis 43 2010. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Both carry nearly identical fuel loads — 53 gal and 53 gal — so range won't be a tiebreaker here.

For family outings this is probably the sharpest distinction between the two. The Beneteau Cyclades 43.3 2010 is rated for 13 passengers, while the Beneteau Oceanis 43 2010 caps at 12. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Cyclades 43.3 2010 could be the deciding factor.

Both boats sit in a similar displacement bracket — 19 797 lbs for the Beneteau Cyclades 43.3 2010 and 19 561 lbs for the Beneteau Oceanis 43 2010. Comparable displacement means broadly similar seakeeping behaviour and load capacity, though hull form and ballast ratio will still produce noticeably different sailing characteristics.

Both boats draw a similar depth — 6,2 ft and 6,6 ft respectively. Marina access and anchorage options should be broadly equivalent between the two.

The Beneteau Cyclades 43.3 2010 uses Fractional Sloop rigging.

For extended cruising, water capacity matters: the Beneteau Oceanis 43 2010 carries 95 gallons versus 14 gallons on the Beneteau Cyclades 43.3 2010 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.

Bottom line: The Beneteau Cyclades 43.3 2010 and Beneteau Oceanis 43 2010 are closely matched on paper. A sea trial on both in representative conditions is the only reliable way to find which one suits your sailing style, home port, and intended cruising ground.
Measurements / Dimensions
Length overall - Detail43.50 ft
Length overall - Detail42.12 ft
Length - Feet43.5
Length - Feet42.12
Length overall - Meters13.26
Length overall - Meters12.84
Length overall - Inches522
Length overall - Inches505
Beam14.53 ft
Beam13.60 ft
Beam - Meters4.43
Beam - Meters4.15
Beam - Inches174
Beam - Inches163
Draft [max] - Detail6.23 ft
Draft [max] - Detail6.58 ft
Draft [max] - Meters1.9
Draft [max] - Meters2.01
Draft [max] - Inches75
Draft [max] - Inches79
Displacement19797.00 lbs
Displacement19561.00 lbs
Engine and Drivetrain
Fuel tank capacity - Gal53
Fuel tank capacity - Gal52.83
Fuel tank capacity - Liters200.63
Fuel tank capacity - Liters199.98
Horsepower54 hp
Horsepower54 hp
Engine makenot available
Engine makeYanmar
Fuel typenot available
Fuel typeDiesel
Operational Info
Water capacity14
Water capacity95.1
RiggingFractional Sloop
Riggingnot available
Boat typeSail
Boat typeSail
Sleeping capacitynot available
Sleeping capacity7
Cabinsnot available
Cabins3
Headnot available
Head2

Beneteau Cyclades 43.3 2010 vs Beneteau Oceanis 43 2010 — Common Questions

Which is the larger boat — the Beneteau Cyclades 43.3 2010 or the Beneteau Oceanis 43 2010?
The Beneteau Cyclades 43.3 2010 is the longer of the two at 43,5 feet overall. The Beneteau Oceanis 43 2010 comes in at 42,1 feet, making it roughly 1,4 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Beneteau Cyclades 43.3 2010 or the Beneteau Oceanis 43 2010?
For trailering, the Beneteau Oceanis 43 2010 has the edge at 19 561 lbs dry weight versus 19 797 lbs for the Beneteau Cyclades 43.3 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Beneteau Cyclades 43.3 2010 is Coast Guard rated for 13 passengers, while the Beneteau Oceanis 43 2010 is certified for 12. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the deeper draft — the Beneteau Cyclades 43.3 2010 or the Beneteau Oceanis 43 2010?
The Beneteau Oceanis 43 2010 has the deeper draft at 6,6 ft, versus 6,2 ft for the Beneteau Cyclades 43.3 2010. A deeper draft generally means better upwind performance and stability, but limits access to shallow anchorages and some marina berths. Always check the controlling depth of your home port and favourite cruising grounds before committing.
Is the Beneteau Cyclades 43.3 2010 or the Beneteau Oceanis 43 2010 better suited for offshore sailing?
For offshore work, displacement and construction are the primary indicators. The Beneteau Cyclades 43.3 2010 at 19 797 lbs displacement is the heavier, more load-carrying design — generally better suited to extended passages where seakeeping and provisioning capacity matter most. The Beneteau Oceanis 43 2010 at 19 561 lbs will typically be livelier and more responsive in lighter conditions.
Which boat is better equipped for long-distance cruising?
For extended passages, fresh water capacity is a key indicator of cruising readiness. The Beneteau Oceanis 43 2010 carries 95 gallons of fresh water compared to 14 gallons on the Beneteau Cyclades 43.3 2010 — a meaningful advantage when watermaker installations or port stops aren't guaranteed.
Which boat is wider, and does it affect trailering?
The Beneteau Cyclades 43.3 2010 measures 174" wide, compared to 163" for the Beneteau Oceanis 43 2010. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
How do the fuel tanks compare on the Beneteau Cyclades 43.3 2010 and Beneteau Oceanis 43 2010?
Both boats carry similar fuel loads — 53 gallons and 53 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.
Are the Beneteau Cyclades 43.3 2010 and Beneteau Oceanis 43 2010 from the same manufacturer?
Yes — both the Beneteau Cyclades 43.3 2010 and the Beneteau Oceanis 43 2010 are built by Beneteau. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.