The Beneteau Antares 8.80 2011 vs Beneteau Cyclades 43.3 2010 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.
Size is the most obvious dividing line here. The Beneteau Cyclades 43.3 2010 measures 43,5 feet overall (2010), giving it roughly 14,2 additional feet of deck space compared to the Beneteau Antares 8.80 2011 at 29,3 feet (2011). Weight tells a clearer story for trailering families: the Beneteau Cyclades 43.3 2010 tips the scales at 19 797 lbs — 11 642 lbs less than the Beneteau Antares 8.80 2011 at 8 155 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 300 hp, the Beneteau Antares 8.80 2011 has a 246-hp advantage over the Beneteau Cyclades 43.3 2010's 54-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Beneteau Antares 8.80 2011 carries 106 gallons versus 53 gallons in the Beneteau Cyclades 43.3 2010. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
For family outings this is probably the sharpest distinction between the two. The Beneteau Cyclades 43.3 2010 is rated for 13 passengers, while the Beneteau Antares 8.80 2011 caps at 8. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Cyclades 43.3 2010 could be the deciding factor.
Displacement is where these two sailboats genuinely part ways. The Beneteau Cyclades 43.3 2010 displaces 19 797 lbs — a 11 642-lb difference over the Beneteau Antares 8.80 2011 at 8 155 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.
For auxiliary power the Beneteau Antares 8.80 2011 carries a 300-hp engine against 54 hp on the Beneteau Cyclades 43.3 2010. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.
For extended cruising, water capacity matters: the Beneteau Antares 8.80 2011 carries 26 gallons versus 14 gallons on the Beneteau Cyclades 43.3 2010 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.
Bottom line: The Beneteau Cyclades 43.3 2010 is the offshore and bluewater choice — at 19 797 lbs displacement and 44 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau Antares 8.80 2011 at 8 155 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.