The Beneteau Antares 6.80 2012 vs Beneteau Oceanis Clipper 411 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceanis Clipper 411 2008 measures 41,0 feet overall (2008), giving it roughly 19,7 additional feet of deck space compared to the Beneteau Antares 6.80 2012 at 21,3 feet (2012). Weight tells a clearer story for trailering families: the Beneteau Oceanis Clipper 411 2008 tips the scales at 17 196 lbs — 13 747 lbs less than the Beneteau Antares 6.80 2012 at 3 449 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Beneteau Antares 6.80 2012 carries a rated maximum of 150 hp. Engine data for the Beneteau Oceanis Clipper 411 2008 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.Fuel capacity breaks the other way: the Beneteau Oceanis Clipper 411 2008 carries 45 gallons versus 36 gallons in the Beneteau Antares 6.80 2012. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceanis Clipper 411 2008 is rated for 12 passengers, while the Beneteau Antares 6.80 2012 caps at 6. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceanis Clipper 411 2008 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceanis Clipper 411 2008 displaces 17 196 lbs — a 13 747-lb difference over the Beneteau Antares 6.80 2012 at 3 449 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau Oceanis Clipper 411 2008 draws 4,8 ft, compared to 1,5 ft for the Beneteau Antares 6.80 2012. That 3,3-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Beneteau Antares 6.80 2012 has a documented auxiliary engine of 150 hp.

For extended cruising, water capacity matters: the Beneteau Oceanis Clipper 411 2008 carries 151 gallons versus 5 gallons on the Beneteau Antares 6.80 2012 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.