The Beneteau 34.7 Deep draft 2005 vs Beneteau Evasion 34 Fin keel 1980 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.
On paper these two are close siblings in the size department — Beneteau 34.7 Deep draft 2005 at 34,0 ft versus Beneteau Evasion 34 Fin keel 1980 at 35,1 ft. Weight tells a clearer story for trailering families: the Beneteau Evasion 34 Fin keel 1980 tips the scales at 12 125 lbs — 2 160 lbs less than the Beneteau 34.7 Deep draft 2005 at 9 965 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 50 hp, the Beneteau Evasion 34 Fin keel 1980 has a 29-hp advantage over the Beneteau 34.7 Deep draft 2005's 21-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Beneteau Evasion 34 Fin keel 1980 carries 53 gallons versus 20 gallons in the Beneteau 34.7 Deep draft 2005. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
Both boats are rated for 10 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
Displacement is where these two sailboats genuinely part ways. The Beneteau Evasion 34 Fin keel 1980 displaces 12 125 lbs — a 2 160-lb difference over the Beneteau 34.7 Deep draft 2005 at 9 965 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.
Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau 34.7 Deep draft 2005 draws 6,7 ft, compared to 5,1 ft for the Beneteau Evasion 34 Fin keel 1980. That 1,6-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.
The Beneteau 34.7 Deep draft 2005 uses Sloop rigging. Helm style differs too: the Beneteau 34.7 Deep draft 2005 uses a 1 wheel versus a 2 wheels on the Beneteau Evasion 34 Fin keel 1980. Wheel helms give better leverage and visibility on larger boats; tillers offer direct feedback and simplicity on smaller ones. For auxiliary power the Beneteau Evasion 34 Fin keel 1980 carries a 50-hp engine against 21 hp on the Beneteau 34.7 Deep draft 2005. Motoring range and ability to punch through a foul current or enter a tight marina under power will favour the more powerful installation.
Hull speed is rated at 7,2 knots for the Beneteau Evasion 34 Fin keel 1980 and 7,2 knots for the Beneteau 34.7 Deep draft 2005. For extended cruising, water capacity matters: the Beneteau Evasion 34 Fin keel 1980 carries 79 gallons versus 26 gallons on the Beneteau 34.7 Deep draft 2005 — a significant advantage on longer passages where watermaker or provisioning stops aren't guaranteed.
Bottom line: The Beneteau Evasion 34 Fin keel 1980 is the offshore and bluewater choice — at 12 125 lbs displacement and 35 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau 34.7 Deep draft 2005 at 9 965 lbs is the more nimble, accessible option — easier to single-hand and better suited to coastal and inland sailing.