Beneteau 25 1992 boat specs
Beneteau
Beneteau 25 1992
1992
View full specs →
VS
Beneteau Oceeanis Clipper 523 2008 boat specs
Beneteau
Beneteau Oceeanis Clipper 523 2008
2008
View full specs →

Beneteau 25 1992 vs Beneteau Oceeanis Clipper 523 2008: Same Brand, Different Boat

The Beneteau 25 1992 vs Beneteau Oceeanis Clipper 523 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

Size is the most obvious dividing line here. The Beneteau Oceeanis Clipper 523 2008 measures 53,3 feet overall (2008), giving it roughly 28,6 additional feet of deck space compared to the Beneteau 25 1992 at 24,7 feet (1992). Weight tells a clearer story for trailering families: the Beneteau Oceeanis Clipper 523 2008 tips the scales at 30 864 lbs - 28 263 lbs less than the Beneteau 25 1992 at 2 601 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The Beneteau 25 1992 carries a rated maximum of 7 hp. Engine data for the Beneteau Oceeanis Clipper 523 2008 wasn't available in our records - check the manufacturer's spec sheet before sizing a motor.

For family outings this is probably the sharpest distinction between the two. The Beneteau Oceeanis Clipper 523 2008 is rated for 16 passengers, while the Beneteau 25 1992 caps at 7. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Beneteau Oceeanis Clipper 523 2008 could be the deciding factor.

Displacement is where these two sailboats genuinely part ways. The Beneteau Oceeanis Clipper 523 2008 displaces 30 864 lbs - a 28 263-lb difference over the Beneteau 25 1992 at 2 601 lbs. That gap separates two entirely different categories of sailing: the heavier boat is built for offshore passage-making and load-carrying, while the lighter hull rewards performance sailing and easier handling in lighter air.

Draft is a practical consideration that many buyers underestimate until they're already at the marina. The Beneteau Oceeanis Clipper 523 2008 draws 7,7 ft, compared to 5,2 ft for the Beneteau 25 1992. That 2,5-foot difference affects which anchorages you can access, which haul-out facilities will take you, and how carefully you need to read the tide tables in shallower cruising grounds.

The Beneteau 25 1992 uses Sloop rigging. The Beneteau 25 1992 has a documented auxiliary engine of 7 hp.

The Beneteau 25 1992 is trailerable, giving it a significant lifestyle advantage for sailors who want to move between lakes, rivers, and coastal waters without committing to a marina slip.

Bottom line: The Beneteau Oceeanis Clipper 523 2008 is the offshore and bluewater choice - at 30 864 lbs displacement and 53 ft it has the load capacity, range, and seakeeping for extended passages. The Beneteau 25 1992 at 2 601 lbs is the more nimble, accessible option and is trailerable - easier to single-hand and better suited to coastal and inland sailing.
Measurements / Dimensions
Length overall - Detail24.70 ft
Length overall - Detail53.31 ft
Length - Feet24.7
Length - Feet53.31
Length overall - Meters7.53
Length overall - Meters16.25
Length overall - Inches296
Length overall - Inches640
Beam8.70 ft
Beam16.01 ft
Beam - Meters2.65
Beam - Meters4.88
Beam - Inches104
Beam - Inches192
Draft [max] - Detail5.20 ft
Draft [max] - Detail7.71 ft
Draft [max] - Meters1.58
Draft [max] - Meters2.35
Draft [max] - Inches62
Draft [max] - Inches93
Displacement2601.00 lbs
Displacement30864.00 lbs
Body / Hull
Rudder1 spade rudder
Ruddernot available
Helm1 tiller
Helmnot available
Engine and Drivetrain
Horsepower7 hp
Horsepowernot available
Drive typeoutboard
Drive typenot available
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal198
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters749.51
Fuel typenot available
Fuel typeDiesel
Performance
Maximum speed6.3
Maximum speednot available
Maximum speed measureknots
Maximum speed measurenot available
Operational Info
Sleeping capacity2
Sleeping capacity6
TrailerableYes
Trailerablenot available
RiggingSloop
Riggingnot available
Mast ConfigurationKeel stepped mast
Mast Configurationnot available
Boat typeSail
Boat typeSail
Cabinsnot available
Cabins3
Headnot available
Head2
Water capacitynot available
Water capacity119

Beneteau 25 1992 vs Beneteau Oceeanis Clipper 523 2008 - Common Questions

Which is the larger boat - the Beneteau 25 1992 or the Beneteau Oceeanis Clipper 523 2008?
The Beneteau Oceeanis Clipper 523 2008 is the longer of the two at 53,3 feet overall. The Beneteau 25 1992 comes in at 24,7 feet, making it roughly 28,6 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Beneteau 25 1992 or the Beneteau Oceeanis Clipper 523 2008?
For trailering, the Beneteau 25 1992 has the edge at 2 601 lbs dry weight versus 30 864 lbs for the Beneteau Oceeanis Clipper 523 2008. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Beneteau 25 1992 has a documented max rating of 7 hp. Engine specifications for the Beneteau Oceeanis Clipper 523 2008 were not available in our database - check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Beneteau 25 1992 is Coast Guard rated for 7 passengers, while the Beneteau Oceeanis Clipper 523 2008 is certified for 16. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the deeper draft - the Beneteau 25 1992 or the Beneteau Oceeanis Clipper 523 2008?
The Beneteau Oceeanis Clipper 523 2008 has the deeper draft at 7,7 ft, versus 5,2 ft for the Beneteau 25 1992. A deeper draft generally means better upwind performance and stability, but limits access to shallow anchorages and some marina berths. Always check the controlling depth of your home port and favourite cruising grounds before committing.
Is the Beneteau 25 1992 or the Beneteau Oceeanis Clipper 523 2008 better suited for offshore sailing?
For offshore work, displacement and construction are the primary indicators. The Beneteau Oceeanis Clipper 523 2008 at 30 864 lbs displacement is the heavier, more load-carrying design - generally better suited to extended passages where seakeeping and provisioning capacity matter most. The Beneteau 25 1992 at 2 601 lbs will typically be livelier and more responsive in lighter conditions.
Can the Beneteau 25 1992 be trailered?
The Beneteau 25 1992 is listed as trailerable, giving owners the flexibility to launch from any suitable ramp and avoid permanent berthing costs. The Beneteau Oceeanis Clipper 523 2008 is not listed as trailerable - it will need a marina berth or mooring.
Which boat is wider, and does it affect trailering?
The Beneteau Oceeanis Clipper 523 2008 measures 192" wide, compared to 104" for the Beneteau 25 1992. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Beneteau 25 1992 and Beneteau Oceeanis Clipper 523 2008 from the same manufacturer?
Yes - both the Beneteau 25 1992 and the Beneteau Oceeanis Clipper 523 2008 are built by Beneteau. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.