Alumaweld Talon 15 2008 boat specs
Alumaweld
Alumaweld Talon 15 2008
2008
View full specs →
VS
Alumaweld Talon 2009 boat specs
Alumaweld
Alumaweld Talon 2009
2009
View full specs →

Alumaweld Talon 15 2008 vs Alumaweld Talon 2009: A Close Look at Two Modified-V Boats

Both the Alumaweld Talon 15 2008 and the Alumaweld Talon 2009 are modified-V designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department - Alumaweld Talon 15 2008 at 15,0 ft versus Alumaweld Talon 2009 at 15,0 ft. At 835 lbs and 835 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling - 60 hp for the Alumaweld Talon 15 2008 and 60 hp for the Alumaweld Talon 2009. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Both carry nearly identical fuel loads - 18 gal and 18 gal - so range won't be a tiebreaker here.

Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumaweld Talon 2009 comes in at 14 lbs per hp versus 14 lbs per hp for the Alumaweld Talon 15 2008. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: The Alumaweld Talon 15 2008 and Alumaweld Talon 2009 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumaweld
MakeAlumaweld
ModelTalon 15
ModelTalon
Model Year2008
Model Year2009
Measurements / Dimensions
Beam78.75 in. At Chine: 60 in.
Beam78.75 in. At Chine: 60 in.
Beam - Meters2.01
Beam - Meters2.01
Beam - Inches78.75
Beam - Inches78.75
Deadrise10℃
Deadrise10°
Depth - Detail22 in.
Depth - Detail22 in.
Depth - Centimeters55.88
Depth - Centimeters55.88
Depth - Inches22
Depth - Inches22
Weight - Detail835 lbs.
Weight - Detail835 lbs.
Weight - kg378.75
Weight - kg378.75
Weight - lbs.835
Weight - lbs.835
Height - DetailSide: 25 in.
Height - DetailSide: 25 in.
Height - Meters0.64
Height - Meters0.64
Height - Inches25
Height - Inches25
Height [transom]20 in.
Height [transom]20 in.
Length - Feet15
Length - Feet15
Length - Inches7
Length - Inches7
Length overall - Detail15 ft. 7 in.
Length overall - Detail15 ft. 7 in.
Length overall - Meters4.75
Length overall - Meters4.75
Length overall - Inches187
Length overall - Inches187
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessBottom: 0.160 in. Side: 0.100 in.
Hull thicknessBottom: 0.160 in. Side: 0.100 in.
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel tank capacity - Detail18 gal.
Fuel tank capacity - Detail18 gal.
Fuel tank capacity - Liters68.14
Fuel tank capacity - Liters68.14
Fuel tank capacity - Gal18
Fuel tank capacity - Gal18
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine maxProp: 60 hp Jet: 40 hp
Engine maxProp: 60 hp Jet: 40 hp
Operational Info
Maximum capacity835 lbs.
Maximum capacity900 lbs.
Maximum people4 @ 600 lbs.
Maximum people4 at 600 lbs.

Alumaweld Talon 15 2008 vs Alumaweld Talon 2009 - Common Questions

Which is the larger boat - the Alumaweld Talon 15 2008 or the Alumaweld Talon 2009?
The Alumaweld Talon 2009 is the longer of the two at 15,0 feet overall. The Alumaweld Talon 15 2008 comes in at 15,0 feet, making it roughly 0,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumaweld Talon 15 2008 or the Alumaweld Talon 2009?
For trailering, the Alumaweld Talon 2009 has the edge at 835 lbs dry weight versus 835 lbs for the Alumaweld Talon 15 2008. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumaweld Talon 15 2008 is Coast Guard rated for 4 passengers, while the Alumaweld Talon 2009 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumaweld Talon 2009 has a better power-to-weight ratio at 14 lbs per hp compared to 14 lbs per hp for the Alumaweld Talon 15 2008. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Alumaweld Talon 15 2008 and Alumaweld Talon 2009 share an 78.75 in. At Chine: 60 in. beam - meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
How do the fuel tanks compare on the Alumaweld Talon 15 2008 and Alumaweld Talon 2009?
Both boats carry similar fuel loads - 18 gallons and 18 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.
Are the Alumaweld Talon 15 2008 and Alumaweld Talon 2009 from the same manufacturer?
Yes - both the Alumaweld Talon 15 2008 and the Alumaweld Talon 2009 are built by Alumaweld. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.